"Cammed" 5.0 Idle
FWIW Ford will be offering something similar (not as extreme of a difference) on the new Boss coming out. It will be changed with a different ignition key there are two different tunes loaded into the ecu.
Am I the only one that thinks this is dumb? You get people thinking that your car is cammed without the power to back it up. I guess if your not racing it and just want the sound it works but I'd rather it sounded more stock and ran like a cammed car than the opposite
They make plenty of power stock. I think its kinda pointless as well unless it adds power. But if you want the cam 'sound' without doing anything but loading up an e-mail tune its kinda neat I guess.
My car idles and drives like stock and runs 10s, I'd rather have that then a car that idles like a pro stock and runs 12s.
My car idles and drives like stock and runs 10s, I'd rather have that then a car that idles like a pro stock and runs 12s.
Am I the only one that thinks this is dumb? You get people thinking that your car is cammed without the power to back it up. I guess if your not racing it and just want the sound it works but I'd rather it sounded more stock and ran like a cammed car than the opposite
You could do this with a pushrod motor but chevy does need to develop more DOHC motors because as much as pushrods are perfectly ok.. with the addition of technologies like DI and variable vane turbos ect offering a pushrod motor today is like offering a modern car with drum brakes. Even though a manufacturer could easily make them work just as well as discs peoples view of them is they are archaic.
It does have the power.. Its essentially a cammed car from the factory with the ability to idle like stock.
You could do this with a pushrod motor but chevy does need to develop more DOHC motors because as much as pushrods are perfectly ok.. with the addition of technologies like DI and variable vane turbos ect offering a pushrod motor today is like offering a modern car with drum brakes. Even though a manufacturer could easily make them work just as well as discs peoples view of them is they are archaic.
You could do this with a pushrod motor but chevy does need to develop more DOHC motors because as much as pushrods are perfectly ok.. with the addition of technologies like DI and variable vane turbos ect offering a pushrod motor today is like offering a modern car with drum brakes. Even though a manufacturer could easily make them work just as well as discs peoples view of them is they are archaic.
Actually have a race setup with a smartass kid whos dad bought him a 5.0 after wrecking his evo. Not too worried as he cant drive but with a good driver about what would need to be done to an LS1 to hang with these 5.0s?
Teching In
Joined: Oct 2009
Posts: 18
Likes: 2
From: Nashville / Indianapolis
Am I the only one that thinks this is dumb? You get people thinking that your car is cammed without the power to back it up. I guess if your not racing it and just want the sound it works but I'd rather it sounded more stock and ran like a cammed car than the opposite
Ah gotcha...I havent read much about these yet I just know they perform very well straight from the factory which is finally nice to see.
Actually have a race setup with a smartass kid whos dad bought him a 5.0 after wrecking his evo. Not too worried as he cant drive but with a good driver about what would need to be done to an LS1 to hang with these 5.0s?
Actually have a race setup with a smartass kid whos dad bought him a 5.0 after wrecking his evo. Not too worried as he cant drive but with a good driver about what would need to be done to an LS1 to hang with these 5.0s?
I've seen one trap 111-112mph the same day my car went 110mph (was slightly hitting the rev limiter) but only 13.2 due to wheel hop.
my little brothers with CAI and tune from Evolution went 8.17@90mph in the 1/8th on street tires with a 1.97 60ft. My brother's car doesn't get wheel hop.
my little brothers with CAI and tune from Evolution went 8.17@90mph in the 1/8th on street tires with a 1.97 60ft. My brother's car doesn't get wheel hop.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Oh nevermind then I thought they were in the elevens for some reason, he defineately wont be a problem. I really need to sit down and start reading I havent been paying attention to any of the new stuff very closely.
Either way 12.4 is pretty awsome for a stock factory car on a good tire and I actually think they look great. I saw a black one the other day and it had those black fivestar rockstar wheels that everyone with a truck and their effing mother have...with the chrome star in the middle, and they were probably 18's on a 5.0 and it looked SICK! First time I saw a set of them on a car and not a lifted truck
Either way 12.4 is pretty awsome for a stock factory car on a good tire and I actually think they look great. I saw a black one the other day and it had those black fivestar rockstar wheels that everyone with a truck and their effing mother have...with the chrome star in the middle, and they were probably 18's on a 5.0 and it looked SICK! First time I saw a set of them on a car and not a lifted truck
Im not a ford guy but........ The new wave is on its way.... Thats why the new corvette will have a setup like this soon. Its unavoidable. My wife works for ford and i must say they are working hard to make a good product. I have driven one... they run good. She has some friends at work who bought a few of em. I still think its funny my 10 year old z06 is still faster tho... a stock 02 z will trap 117-118 LOL
Teching In
Joined: Jan 2007
Posts: 2
Likes: 0
From: Central Ohio
From the tuner's mouth, well keyboard..
"No real performance gains. It is strictly idle only. TiVCT allows independant cam timing both the intake and exhaust valves across the entire rpm range. So the idle angles have no affect on the wot angles....Also, it has nothing to do with the "Track key". "
Even it it's only for the idle sound - why not do it?
"No real performance gains. It is strictly idle only. TiVCT allows independant cam timing both the intake and exhaust valves across the entire rpm range. So the idle angles have no affect on the wot angles....Also, it has nothing to do with the "Track key". "
Even it it's only for the idle sound - why not do it?
This one sounds bad even without long tubes. Corsa Extreme axle back mufflers, a CAI, custom cat deletes, a PPC 93 octane performance tune with the "cammed idle"
http://www.youtube.com/watch?v=2yzN5xr7o6E
Here one with complete stock exhaust.
http://www.youtube.com/watch?v=9a_R6Fw_vOU
http://www.youtube.com/watch?v=2yzN5xr7o6E
Here one with complete stock exhaust.
http://www.youtube.com/watch?v=9a_R6Fw_vOU