Post some driver mod videos!
#61
TECH Senior Member
iTrader: (5)
From my youtube page... driving the TT goat on street tires.... first series of shifts...wasn't really trying to shift too quickly,..as I was on a corner The second series of shifts, (1:02) was a kinda quick lifted shift... Obviously I had some traction issues...and was also, nearing a corner. This vid wasn't taken for this purpose(show and tell)...but not that you guys are giving me motivation with your vids....we're(Z07 Josh and I) gonna have to go out and film some decent shifting vids in the other cars in the stable now...and intentionally shifting quicker.
On a side note...hoping to get some more in car racing footage with these types of vid recordings.
Hero2 used...Hero3 also in stables.
On a side note...hoping to get some more in car racing footage with these types of vid recordings.
Hero2 used...Hero3 also in stables.
#62
http://www.youtube.com/watch?v=cNoYlB0aycU
Here I am driving my friends 04 Cobra a while back. I'm just as hard on my Camaro but don't really have any good incar videos.
Here I am driving my friends 04 Cobra a while back. I'm just as hard on my Camaro but don't really have any good incar videos.
Found a video of me driving my GTO I had a while back.
#66
TECH Regular
#71
Here's my fast shifting, lifting the throttle, I dont powershift because I dont want to rebuilt my trans for a couple of .01 seconds.
But I bought a LNC-2000 launch control this winter and I cant wait to use it with no-lift shift!
But I bought a LNC-2000 launch control this winter and I cant wait to use it with no-lift shift!
#73
No, I'll use the clutch switch to trigger it. I've check your video with clutchless shift and why didnt you only use your clutch and stay wot? Faceplated trans can powershift easy, no?
#75
10 Second Club
iTrader: (8)
The wot shift feels faster in the car but it's really not on a car this fast. On a 13-16 sec car you might make a little ground with it but not much. The feeling of the car jerking around makes it feel faster than it is.
If you want that shift cut to work right it has to be on the shifter