New LS1 Owners - Newbie Tech Basic Technical Questions & Advice
Sponsored by:
Sponsored by:

Cruise Control

Thread Tools
 
Search this Thread
 
Old 07-14-2009 | 03:24 PM
  #1  
TheVandMan's Avatar
Thread Starter
Registered User
 
Joined: Jul 2009
Posts: 11
Likes: 0
From: Ohio
Default Cruise Control

Ive had the car for a few days, but can't figure out how to use the cruise control...it is different than the other cars I have had. I don't have the owner's manual and the paint is all worn off of the cruise stick. I'm not even sure if I am in the right area, is it the same that controls the wipers/turn signal?

There is a little horizontal switch that can move either right or left. Car is auto by the way...I understand this is an easy question. Thank you in advance.
Old 07-14-2009 | 03:34 PM
  #2  
2001NBMZ28's Avatar
TECH Senior Member
 
Joined: Dec 2001
Posts: 5,399
Likes: 3
From: Jacksonville, FL
Default

You can look at/download a manual here: http://shbox.com/pdf/manuals.html
Old 07-14-2009 | 03:36 PM
  #3  
theprof17's Avatar
Teching In
iTrader: (1)
 
Joined: Sep 2008
Posts: 24
Likes: 0
From: Austin, Texas
Default

Move the little button right or left to turn on. Once it's on hit the button at the very end of the stick to set the speed.
Old 07-14-2009 | 03:45 PM
  #4  
TheVandMan's Avatar
Thread Starter
Registered User
 
Joined: Jul 2009
Posts: 11
Likes: 0
From: Ohio
Default

that switch can go all the way to the left (1) , and then click to the right (2). When it is on the right (2), it can slide more to the right and then come back to position (2). Or, like you said, when it is on (1) I push the button on the end, and if it goes to (2), then it turns off?
Old 07-14-2009 | 03:56 PM
  #5  
TheVandMan's Avatar
Thread Starter
Registered User
 
Joined: Jul 2009
Posts: 11
Likes: 0
From: Ohio
Default

Just read the manual...thanks. It sucks not having any of the white letters on anything.




All times are GMT -5. The time now is 11:17 PM.