Need suggestions for a cam
10-10-2010, 04:35 PM
#1
Teching In
Thread Starter
Join Date: May 2010
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Need suggestions for a cam I have a knock towards the back of my block. Im thinking it might be a loose or bent piston rod. Since this happen Im thinking about putting in a bigger cam when i get it fixed. I have stock heads so I want a cam that the stock heads can handle. Any suggestions?
2000 Trans am. Ls1 5.7
2000 Trans am. Ls1 5.7
10-10-2010, 08:00 PM
#2
Staging Lane
Join Date: May 2010
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
I am going to be camming my 00SS i am going to run I think a 228R is what I am thinking now. I contemplated a 233/239 but really to get full potential of a cam you really need to do some head work, what heads are on ur car I have 241s on mine and will either go to 243s or 5.3 TEA stg 1.5, your springs also will have to accomidate your cam lif so on a stock set under .600 but i highlys suggest doing some homework and just end up doing heads also. Its almost like changing oil and running an old filter
