Intake lid on 02' SS same as on a T/A?
03-01-2004 | 08:31 PM
#1
Thread Starter
On The Tree
Joined: Mar 2003
Posts: 125
Likes: 0
From: Raleigh, NC
Intake lid on 02' SS same as on a T/A? Sorry, I'm retarted. Is the intake on the SS's the same as on the WS6s? I'm looking for a stock intake setup for an 02' SS since my friend will give me his K&N setup if I find him a stock one. Just wanted to see what all I'd need to find to replace what he's got on there. Thanks guys!
Mike
Mike
03-02-2004 | 10:07 AM
#2
The better lid (no resonators, tapered back, larger
oval outlet) was only an option, you could find
SSs with stock intake (the 335HP exhaust-only
package rather than 345HP in '02). The SS had
a lower-profile lower airbox than the best Firebird
option (WS-6? or more specific ram air?) and this
deeper box bottom is too tall for an SS hood.
He'd need a stock camaro lower airbox and he'd
want the Blackwing SLP lid (w/ all its associated
pieces) I reckon.
oval outlet) was only an option, you could find
SSs with stock intake (the 335HP exhaust-only
package rather than 345HP in '02). The SS had
a lower-profile lower airbox than the best Firebird
option (WS-6? or more specific ram air?) and this
deeper box bottom is too tall for an SS hood.
He'd need a stock camaro lower airbox and he'd
want the Blackwing SLP lid (w/ all its associated
pieces) I reckon.
