LY6 Advice
#1
LY6 Advice
Firstly I apologize if I've overlooked the answers in another thread, however...
I have an LY6 w/ L92 heads with below average miles on but none of the injection system, I also have the corresponding msd LS ignition controller. I intend to run this with the GMPP carb intake and most likely a 750 cfm holley or similar.
My questions are...
Is it possible to run this configuration with the VVT cam still in place along with the phaser (although not active)?
Does anyone know of a stand alone cam phaser controller that would allow the VVT to still function, if the first scenario isn't an option.
I'm currently in almost no money for the engine so would like to keep the initial costs of getting it running to a minimum. The plan isn't for it to be a daily driver so prefect road manners aren't a must.
Many thanks guys.
I have an LY6 w/ L92 heads with below average miles on but none of the injection system, I also have the corresponding msd LS ignition controller. I intend to run this with the GMPP carb intake and most likely a 750 cfm holley or similar.
My questions are...
Is it possible to run this configuration with the VVT cam still in place along with the phaser (although not active)?
Does anyone know of a stand alone cam phaser controller that would allow the VVT to still function, if the first scenario isn't an option.
I'm currently in almost no money for the engine so would like to keep the initial costs of getting it running to a minimum. The plan isn't for it to be a daily driver so prefect road manners aren't a must.
Many thanks guys.