When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hey guys so I'm thinking bout picking up an 12 bolt rear end rebuilding it and putting in my 2000ss any suggestions on what one I should look for? Any info would be much appreciated thanks again.
Make sure its a 12 bolt for an fbody not an old 12 bolt out a g-body from back in the day. If your are building it up, replace all bearings and gear and you should be good.
I was thinking buy an old school 12 bolt but cut the axle tubes off and weld the 10 bolt tubes on so over all length would stay the same then get 30 spline axles.
The torque arm does not bolt to the alxe tubes it bolts to the center section of the 10 bolt...get under your car and you'll see what I'm talking about..you need to go to plan B cause your plan A will not work.