My 5.3L Build Ls1 Intake With Truck Accessories..
#22
On The Tree
iTrader: (2)
Join Date: Dec 2013
Location: Texas
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
Looks like you need to upgrade to plus for additional bandwidth....what is causing this is every time someone opens this thread all of these pictures come from photobucket servers and it chews up their bandwidth...pretty much they just want your money so upgrade to plus so we can see the pictures lol
#27
I'm new on here,But just got a 5.3 with harness,pc an trans out of 91 Tahoe been totaled with 84.000 miles on it.im wanting to swap the cam and intake.Was wondering if any one could give a little ideas gm parts to use on it,,,,,thanks for any help,,going it 2001 S10 or 1985 Ford Ranger
#32
On The Tree
Join Date: Sep 2014
Location: Lexington KY
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
so you cant run the 5.3 truck steam lines ? just bend them down a little , i thought i saw a belt number too ,, , i just bought a 5.7 ls motor that had a rod broken and knocked a hole in the side, i was wondering what to keep and and what to sell , can i run my 5.3 injectors and fuel rail , just change the intake and do the mods to the neck and alt ,
thanks
great write up we need more of these
thanks
great write up we need more of these
Last edited by lilrobo; 12-07-2014 at 07:56 AM.
#33
Very nice and gives me some ideas as I hate the 5.3 intake. Mine is going in an 87 elky and I have the CTS pan ans hooker manifolds for it already. Harness mounts and all is ready to go.
Did you try a ls water pump at all? I mean if its off, why not put a new one on? Looks like just the upper outlet is moved;
Did you try a ls water pump at all? I mean if its off, why not put a new one on? Looks like just the upper outlet is moved;
Last edited by FBJR; 01-04-2015 at 11:11 PM.
#36
My 5.3L Build Ls1 Intake With Truck Accessories..
I just downloaded the mobile app and made sure to re-find this thread. Seeing my career went down the drain when my back went south im forced to research the "cheaper" methods. It's comforting to see peeps like yourself getting it done with style, thanks for taking the time to share your accomplishments. I appreciate it!
#38
Intake
Hey seabass!!! On the intake, driver side fuel return port right at the coil connector, what did you end up doing? Mines hitting the coil. Any other little issues you have with it? Thanks for all the posts and photos! Im 60 % done with mine, just gotta get an ac bracket for the passenger side that will work with truck acc
The following users liked this post:
Zack Sitter (11-05-2020)
#40
SEABASS03 why don't you change the entire pulley kit for a more billet style like. I personaly don't like the bulky truck style bracket. It takes too much space and just don't look sexy after all.