My Camaro SS Isnt Normal!!!
#323
Originally Posted by h.o.ls1
**** this kid im sick or reading .....
btw, lets at least give the kid till 6 or so before you really let him have it, right?
#327
TECH Veteran
Thread Starter
iTrader: (4)
Join Date: Aug 2006
Location: San Marcos/Plano, Texas
Posts: 4,821
Likes: 0
Received 0 Likes
on
0 Posts
ok did it here are the charts- the guy said that its whp so i dont know what the max horsepower is by looking at it and the torque is 342.83 oh and where it says stock up next to my name, that's what i put in the signature,, because i didnt know if it was stock or not
#329
HOLY CRAP...NUMBERS!
The car looks like it has to have SOMETHING guys, either that or this dyno is off. Maybe it has an ORY? I can see 315 stock and then the ORY would give him another 10 or so. Definitely not stock, it has to have SOMETHING in there somewhere...
Take a pic of under the car where the exhaust comes off the manifolds...and take a pic of the manifolds.
The car looks like it has to have SOMETHING guys, either that or this dyno is off. Maybe it has an ORY? I can see 315 stock and then the ORY would give him another 10 or so. Definitely not stock, it has to have SOMETHING in there somewhere...
Take a pic of under the car where the exhaust comes off the manifolds...and take a pic of the manifolds.
#331
Wait....WTF. The graph does NOT!!! = the numbers. At no point on that line (hp) did it get over 315. It says 327...Look at it and count the "dots" its 2ish dots above 300, i.e. less than the 3 dots to 320. The tq is also low...can numbers be entered in above the lines where "max hp and tq" is stated and falsify things guys? that looks wierd!
#332
Were your cutouts open? if so, there you go, your car is stock + cutouts...the numbers/graph look wierd to me though, maybe its just my eyes. No freak, just an M6 SS in good shape with cutouts.
#333
TECH Veteran
Thread Starter
iTrader: (4)
Join Date: Aug 2006
Location: San Marcos/Plano, Texas
Posts: 4,821
Likes: 0
Received 0 Likes
on
0 Posts
no i did three pulls and if you look at the air/fuel and go straight up starting at 4 you will notice it at 327.96, dude after all of this and i lagitly(spelled wrong) do ia dyno...now im getting that i tampered with the numbers..come on
#334
Originally Posted by mycamaroSS
no i did three pulls and if you look at the air/fuel and go straight up starting at 4 you will notice it at 327.96, dude after all of this and i lagitly(spelled wrong) do ia dyno...now im getting that i tampered with the numbers..come on
#335
11 Second Club
Join Date: Nov 2006
Location: saint louis Missouri
Posts: 499
Likes: 0
Received 0 Likes
on
0 Posts
as in electric cut outs? or manual? were the cut outs open during the dyno run? Used cut outs -- plural where are they located? on the y pipe? I can see a 6 to 10 whp and wtp gain at the wheels maybe.
#336
Originally Posted by 35thsscamaro02
as in electric cut outs? or manual? were the cut outs open during the dyno run? Used cut outs -- plural where are they located? on the y pipe? I can see a 6 to 10 whp and wtp gain at the wheels maybe.