New LS1 Owners - Newbie Tech Basic Technical Questions & Advice
Sponsored by:
Sponsored by:

How to beat a C5....

Thread Tools
 
Search this Thread
 
Old 03-05-2007 | 09:15 PM
  #1  
Cooper's Avatar
Thread Starter
Teching In
 
Joined: Mar 2007
Posts: 2
Likes: 0
Default How to beat a C5....

I have a 2002 formula NMRA edition A4 with T-Tops, completly stock. What would I need to beat a C5 vette soundly in 1/4 mile and roll racing if he so desires?
Cheers
Cooper
Old 03-05-2007 | 09:23 PM
  #2  
5_02ls1's Avatar
11 Second Club

iTrader: (20)
 
Joined: Oct 2006
Posts: 3,131
Likes: 0
From: Virginia
Default

a gear and lid and cat bac will do this in the 1/4 the c5 has a higher set speed limiter than the f body
Old 03-05-2007 | 09:25 PM
  #3  
'Trust''s Avatar
10 Second Club

iTrader: (24)
 
Joined: Aug 2004
Posts: 7,972
Likes: 3
From: Eternity
Default

If you drive well and he doesn't, nothing. If he's an M6 you'll need a stall and that should do it. If he's an A4, a lid/cutout should do you just fine.

Originally Posted by 5_02ls1
....c5 has a higher set speed limiter than the f body
No it doesn't. Sure on the F-bods that didn't come with Z rated tires, but not the rest.
Old 03-06-2007 | 12:30 AM
  #4  
aaron653's Avatar
TECH Enthusiast
10 Year Member
iTrader: (1)
 
Joined: Aug 2005
Posts: 735
Likes: 0
Default

if you have 3.23's and he has 2.73's and you take out your back seats and sparetire/jack with less than a 1/4 tank of gas then you could probably take him from a stop.(sort of serious)
Old 03-06-2007 | 03:38 AM
  #5  
WS6 Rampage's Avatar
TECH Addict

iTrader: (3)
 
Joined: Feb 2006
Posts: 2,498
Likes: 3
From: The dirty taint of the country. ...Los Angeles
Default

F.Y.I. ... I'd personally avoid a roll race with a C5 in an A4 unless your built up pretty good. Especially if he has a Manual. They're light enough where he'll take you on the roll and eat you on the top end ....especially if you don't know what your do'n! If you had a Manual I'd say that it would be an interesting match. But you don't have an M6...you got your self an A4. Stick to what their good at(A4) and keep the race with the C5 from a dig. Just my .02s!
Old 03-06-2007 | 04:13 AM
  #6  
jester177's Avatar
Launching!

 
Joined: Sep 2005
Posts: 227
Likes: 0
From: tokyo japan
Default

nitrous.
Old 03-06-2007 | 10:24 AM
  #7  
Cooper's Avatar
Thread Starter
Teching In
 
Joined: Mar 2007
Posts: 2
Likes: 0
Default

I have pacesetter long tubes and Y pipe, magnaflow catback and an SLP lid in my garage. So all that could do it? I'm waitng for the track to open so I can get a baseline time.
Cheers
Cooper
Old 03-06-2007 | 11:13 AM
  #8  
Take 2's Avatar
Launching!

iTrader: (9)
 
Joined: Apr 2006
Posts: 279
Likes: 0
From: Houston
Default

Is the C 5 Stock?
Old 03-06-2007 | 11:19 AM
  #9  
98Z28MASS's Avatar
TECH Addict
iTrader: (6)
 
Joined: Jul 2004
Posts: 2,964
Likes: 1
From: Massachusetts
Default

If the C5 is stock then bolt-ons and a stall and you should have him.
Old 03-06-2007 | 02:52 PM
  #10  
Rob98LS1's Avatar
12 Second Club

iTrader: (5)
 
Joined: Jun 2006
Posts: 662
Likes: 3
From: Sacramento
Default

Originally Posted by jester177
nitrous.

werd, +1. That takes care of things fairly easily i would say.
Old 03-06-2007 | 03:00 PM
  #11  
trans2000am's Avatar
TECH Fanatic

iTrader: (49)
 
Joined: Feb 2006
Posts: 1,518
Likes: 0
From: detroit
Default

stall and tires and lid,free air mod's
Old 03-06-2007 | 05:23 PM
  #12  
RooRnZ28's Avatar
10 Second Club
iTrader: (14)
 
Joined: Dec 2005
Posts: 1,392
Likes: 0
From: Central California
Default

why not throw in some boost, then you can take z06's as well
Old 03-06-2007 | 06:59 PM
  #13  
pdd's Avatar
pdd
TECH Veteran
iTrader: (3)
 
Joined: Aug 2003
Posts: 4,156
Likes: 0
From: dudley mass
Default

nothing can beat a C5
Old 03-06-2007 | 07:04 PM
  #14  
gyrene2003's Avatar
12 Second Club

 
Joined: Jul 2005
Posts: 2,213
Likes: 1
From: Chesapeake va
Default

just a lid and i was smoking Z06s all day in the 1/4................................................. ...............or was that 350Zs????
Old 03-06-2007 | 07:35 PM
  #15  
carado1984's Avatar
TECH Resident

 
Joined: Jan 2006
Posts: 991
Likes: 0
From: harrisburg, pa
Default

Originally Posted by pdd
nothing can beat a C5
no thats just your vette haha
Old 03-07-2007 | 07:55 AM
  #16  
SHINER's Avatar
TECH Veteran
iTrader: (18)
 
Joined: Sep 2005
Posts: 4,192
Likes: 0
From: SW Houston
Default

Listen, If you wanna beat a vette or many other iconic cars without completely FULL OUT modding I would get two things on an automatic car.

1)Stall Converter
2)Nitrous

Vettes are not all that much faster than Fbodys. The only thing vettes have going for them is their lightweight and aerodynamic characteristics, but have the same drive train as the Fbody's.

Now Z06 is a different story but if you had the stall and nitrous you could easily beat a C5 Z06.
Old 03-07-2007 | 08:05 AM
  #17  
jwitt2's Avatar
11 Second Club

iTrader: (37)
 
Joined: Jul 2004
Posts: 377
Likes: 0
From: Orlando, FL
Default

Originally Posted by Rob98LS1
werd, +1. That takes care of things fairly easily i would say.

+2

thats all you need..... maybe a lid and filter too. .... . ..
Old 03-07-2007 | 12:02 PM
  #18  
~JOSHUA's Avatar
Banned
iTrader: (92)
 
Joined: Sep 2004
Posts: 7,757
Likes: 1
From: Atlanta
Default

Go ahead and bolt up the headers... install the lid NOW (why wait)

and pay $800 for a basic, yet complete nitrous set-up.

You'll embarrass him badly if you hit the juice during a roll race.
Old 03-07-2007 | 12:21 PM
  #19  
santiago's Avatar
TECH Resident

iTrader: (28)
 
Joined: Sep 2004
Posts: 987
Likes: 0
From: norcal
Default

Originally Posted by pdd
nothing can beat a C5
lol
Old 03-07-2007 | 12:39 PM
  #20  
Lucas'02SS's Avatar
TECH Enthusiast
iTrader: (4)
 
Joined: Jan 2006
Posts: 699
Likes: 0
From: Oklahoma City, OK
Default

Bolt ons and a stall will really wake your car up!
Add nitrous to that and you'll have an even bigger kick in the pants


Quick Reply: How to beat a C5....



All times are GMT -5. The time now is 07:21 PM.