pulling a t56??
#1
Staging Lane
Thread Starter
iTrader: (15)
Join Date: Dec 2007
Location: IN THE OILFIELD,TX
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
pulling a t56??
im about to pull a t56 from my 02 SS....ive never pulled a 6 speed before just alot of autos!! can i just pull the trans first and then un bolt the bell housing or will that just complicate things?? PLEASE LET ME KNOW!! Thanks,Britt
#5
12 Second Club
iTrader: (9)
Join Date: Jun 2006
Location: Grand Forks, North Dakota
Posts: 1,051
Likes: 0
Received 0 Likes
on
0 Posts
Yes, separate them. You will need an 10mm wrench to reach up and loosen the two slave cylinder bolts as you pull them apart about3-4 inches. THen it will come apart. Have some extensions and two knuckles, there are 2 crappy bolts to get at, 1 is horrible, its easier to move the vent tube to the side in my opinion...its on the top of the passenger side...tranny to bellhousing bolt.
Ive had mine in and out a good 5 times. Might be nice to have a deep socket 24mm for holding the crank pulley bolt while u loosen the flywheel bolts.
GOod luck!
Ive had mine in and out a good 5 times. Might be nice to have a deep socket 24mm for holding the crank pulley bolt while u loosen the flywheel bolts.
GOod luck!
Trending Topics
#8
Launching!
iTrader: (5)
Join Date: Sep 2006
Location: Danevang, Texas
Posts: 211
Likes: 0
Received 0 Likes
on
0 Posts
You can unhook the slave line using fast hands and two flatheads. Its alot easier that trying to unbolt the slave and trying not to break the hose.
Pull them separately. I kicked myself in the *** for trying to pull them together. Just hope your dowel pins haven't siezed, we pried on mine for almost a hour before it popped loose from a swift kick!
Pull them separately. I kicked myself in the *** for trying to pull them together. Just hope your dowel pins haven't siezed, we pried on mine for almost a hour before it popped loose from a swift kick!
#10
Staging Lane
Thread Starter
iTrader: (15)
Join Date: Dec 2007
Location: IN THE OILFIELD,TX
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
DAMMIT!! yall werent lying bout it bein a heavy bitch! just got the tranny loose! does the clutch have to come loose before the bell housing will come out?? sorry for the stupid ?'s guys, but the damn thing wont come off! thanks alot for all of the advice.....dont think i coulda done this with out all yall!
Thanks,Britt
Thanks,Britt