95TransAm_ToM

I bought a polyurethane tranny mount for my 99 T/A are they any good? I heard poly anything suck. My stock one broke after a tune, but besides a borla exhaust, a hp tune, slp lid, its stock.

6THZ28

iTrader: (11)

i have an energy suspension tranny mount and haven't had any probs

00'blkss

iTrader: (13)

ive had mine for 4 years and no probs here

gm94

I can't use them. I put one on my 98 TA and the vibration was bad especially around 90-110 mph. The whole dash will vibrate. I replaced the U joints since one was bad and same deal happened. I went and got the OEM mount and problem solved.

OIF1VET

iTrader: (54)

Same here except my vibration started around 50 MPH.. Went back to OEM and no problems.. Hard to say why some cars are ok with it and others aren't..

LS1>girlfriend

iTrader: (19)

poly mounts are stiffer and therefor relate vibrations better. because you went back to the stock mount doesnt mean whatever was vibrating has stopped.

poly mounts are great, i had a poly trans mount in my car for 2 years, no problems

1Loudz28

iTrader: (47)

youll have a little bit more vibration, but its worth it. if your shifter moves at all during hard accelerations, it will eliminate that.

foreverzero

iTrader: (5)

how hard are they to put in? i was thinking about putting some in with my poly motor mounts when i do my header install

3.4camaro

iTrader: (1)

Running solid motor mounts + stock tranny mount = no shifter movement + no NVH!!
EDIT- tranny mounts take about 15 minutes for install. VERY easy.

foreverzero

iTrader: (5)

thanks, guess i gotta pick some up at ws6store.com

ae13291

iTrader: (8)

yea i have poly tranny mount!! ****** love it, only a little more vibrations but well worth it! my car sounds like a beast when your even inside the car now!

95TransAm_ToM

how many bolts does the new one come with i got only 2

ae13291

iTrader: (8)

it comes with 2 studs and 2 nuts! if M6 car then you use only 1 stud 1 nut if its A4 then 2 studs 2 nuts! but thats my prothane mount

Wsteun

iTrader: (3)

Basically, its super easy to install. Support the rear of the tranny, drop the crossmember, unbolt the old one, throw in the new one, replace crossmember and you're good to go.

I have an ES mount in my car, no problems or complaints here.

venomhp

iTrader: (13)

it wont make it sound any different...^^^^

95TransAm_ToM

Ok i put the mount in and my old one was torn in 2, with the new poly one on the highway theres a lot of vibration coming from tranny at hard acceleration, what could this be

ae13291

iTrader: (8)

im talking about inside cabin noise, alot louder!

ae13291

iTrader: (8)

which one did u buy the energy or the prothane??

Grifter

iTrader: (12)

Which ever one you can get a better deal on. They're pretty much the same, I bought my Prothane from BYUNSPEED.

ae13291

iTrader: (8)

well i hear the energy you have to shave off the bottom layer and i heard you souldent use the spacer they supply