westell

two things.
my clear mti fits fine with the holley filter.

if you've done the free ram air mod, your filter will get dirtier quicker, and next to the hp, being able to see your filter is a plus imo

Black Sunshine/ 00SS

iTrader: (1)

My MTI carbon fiber fits like ****. There is a gap between the MAF & the lid, which I have to tape up to properly seal. The lid hits my hood (the first they have heard of this. I guess they dont read the boards much), and the lid cracked on the seam the first month I had the lid. I went all last year with duct tape aroud the lid. I had to super glue it.

They were nice enough to offer me a replacement, if I paid them $90.

My next one will be the TSP clear.

pimpmaro

I've seen the TSP lid, haven't had a chance to get it yet, but IMO the fit is incredible. A friend of mine has it on his car and I've used it on my car at the track and it fits perfectly on both cars.

Gev

Pre-TSP, a lid was a lid. Same power. Until the TSP lid came out. It will outperform all the others.

MrHughes919

I've heard the K&N FIPK works really well with the Ultra Z hood. That hood looks awesome!

TheBlurLS1

iTrader: (8)

my MTI clear is cracked bigger than dallas. the passenger side back of it where it meets the filter is cracked about 3 inches. BS if you asked me. its cracked right along the piece of foam tape i put around it to seal it to the k&n so i dont think its leakin any air. im thinkin about using some epoxy or some silicon on it. will MTI help you out any?? i really like the look of it. i have a k&n sticker on mine and it looks so cool to be able to see the sticker and the filter right below it.

DD966

iTrader: (3)

That's 'cause there is no real difference beteen lids (at most 1 - 2 hp). Funny thing though, what fits well on some cars, does not fit well on others

Cefiro

I installed my MTI lid last week, and I love it! I can def. feel it pulling harder, and longer. I origionally ordered a TSP lid, but 2 weeks later I called them and they said they were switching vendors for black lids, and it may take up to 2 months to get one to me. I am really glad that I just went on ahead and got a MTI lid. In GMHightech, the MTI lid had the fastest time and the highest trap speed.

69_YENKO

iTrader: (16)

I have the TSP Clear lid it fits great, looks great. I wound look at the TSP lid over the MTI which i hear is weak and cracks easily.

toxic99

I have TSP lid and it fit almost perfectly.

allthatisman

I have the MTI clear lid. Love the way it looks, can't really say I felt any difference in performance. It was very hard to get on, and it seems like it could break at an moment since it is only plastic. Ever since I installed that lid and the put on this b.s. BBK tb I have actually lost power. Now my car runs like **** and doesnt feel nearly as strong as it did stock. Now, ordered an S3, and then after that I will go get tuned. Maybe a shop can help me out.....

nickPSD

My TSP fits fine, can feel better acceleration

BTA 123

My TSP lid fits like crap. Looks cool, but fits like crap.

williamb81

just installed my mti lid today!! LOVE the way the clear lid looks with the k&n but it feels as if it will crack soon. really thin! and a bad thing for a part that is stationary with a vibrating engine!!!!! if i could do it again i would get something stronger!!!!

homerunhtr21

iTrader: (18)

Welcome back from 2004.....

69_YENKO

iTrader: (16)

no crap, this was one of the first threads i posted in when i first started the site.

williamb81

lol found it by googling mti lids. didnt know it was from so long ago. lol thats why im a newbie

69_YENKO

iTrader: (16)

thats cool, just keep reading and using the search button and you'll be a tech master in no time

1qwkz

iTrader: (5)

s3 is the way to go for sure

Sickness7

THREAD REVIVAL. I want the black MTI lid and from what ive read they no longer exist is there a vendor who still carries?