Just put on Magnaflow catback
#23
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
As stated above I wouldnt expect to see much more than 5-7 rwhp with lid and catback. 15-20 rwhp would be if you had done headers and ory with the catback and lid. Also, you have to remember you had a 98, which has the worst flowing heads by far of all the years and an ls1 intake. Guys who see 20-25+ rwhp with headers/ory/catback/lid are usually those who have 01-02 ls1's as they had the best flowing heads and the ls6 intake. Dont be dissapointed though, just all the more reason to toss a cam in there!
Not to burst your bubble but my car picked up 30 horse and 34 tq when I put my long tubes on. I already had an MTI lid and an SLP 2OTL cat back so the supporting mods were there.
#24
TECH Addict
iTrader: (6)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Not bursting my bubble at all as there are some very generous dynos out there so they are just a basic tool to estimate power gains. Real gains are on the track. On average though most people will see 15-20 rwhp with headers ory on a pre 01 ls1 and approx 20-25 on a 01+ ls1. Ive seen guys claim 360+rwhp with longtubes and full exhaust and minor bolt ons (ls6 intake, lid, ported TB) and we all know thats very generous. My 98 z28 with a custom grind 232/238 cam, ls6 intake, ported stock tb, headers, ory, magnaflow, 25% pulley, lid, and full tune by Dez Racing only put down 370 rwhp on the dyno (and I was an M6 with stock 3.42 gears) however on the street and track I was able to outrun cars (including other ls1's) with dynosheets reading up to 400 rwhp and it wasnt due to driver error.
#25
11 Second Club
iTrader: (5)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Not bursting my bubble at all as there are some very generous dynos out there so they are just a basic tool to estimate power gains. Real gains are on the track. On average though most people will see 15-20 rwhp with headers ory on a pre 01 ls1 and approx 20-25 on a 01+ ls1. Ive seen guys claim 360+rwhp with longtubes and full exhaust and minor bolt ons (ls6 intake, lid, ported TB) and we all know thats very generous. My 98 z28 with a custom grind 232/238 cam, ls6 intake, ported stock tb, headers, ory, magnaflow, 25% pulley, lid, and full tune by Dez Racing only put down 370 rwhp on the dyno (and I was an M6 with stock 3.42 gears) however on the street and track I was able to outrun cars (including other ls1's) with dynosheets reading up to 400 rwhp and it wasnt due to driver error.
damn thats is sick.. those mods are in my to do list pretty soon
#27
Moderator
iTrader: (15)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The Magnaflow is my favorite exhaust. It made my 02 SS so nice and mellow until WOT, I loved it. Just look and see if your tail pipes are straight. My driver side pipe was crooked and I had to take it to a muffler shop and have it removed to bend it slightly for $40. Stand at the back of the car and look down. Same thing is going on my next car.
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
#29
TECH Addict
Thread Starter
iTrader: (12)
Join Date: Sep 2004
Location: Houston, Texas
Posts: 2,693
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The Magnaflow is my favorite exhaust. It made my 02 SS so nice and mellow until WOT, I loved it. Just look and see if your tail pipes are straight. My driver side pipe was crooked and I had to take it to a muffler shop and have it removed to bend it slightly for $40. Stand at the back of the car and look down. Same thing is going on my next car.![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
#30
TECH Addict
iTrader: (6)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Yea the car was definately fun and Don at Dez racing (aka slowhawk on this board) did such a good job tuning it that it had fantastic idle quality even with a large cam in there. I have an idle and rev clip of my setup if you want. Just click this link:
http://s8.photobucket.com/albums/a28...238orymacs.flv
http://s8.photobucket.com/albums/a28...238orymacs.flv