Piston/Valve clearance w/ L92 heads ?
06-13-2008, 03:28 PM
#1
Teching In
Thread Starter
iTrader: (2)
Join Date: Jan 2008
Location: Tuscaloosa, AL
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Piston/Valve clearance w/ L92 heads ? Newie question .... I am considering purchasing a fellow board members 408 crank/rods/pistons for my 6.0 block. His pistons were cut for ETP 265 heads. I had planned on running L92 CNC'd heads with the build because of the good price/high flow. I think after doing some research that ETP heads have a 11* valve angle and L92's have a 15* valve angle - so they don't match. So the question is can these pistons work w/ the L92 heads despite the difference in applications. Thanks.
