shreveport/bossier hang out!
#8162
#8166
Welccome Goat's ss.
I don't know of any local cruise nights that are a regular thing, but I have been comtemplating asking everyone on here if they wanted to start meeting up on a certain night weekly or every other week somewhere just meet/eat and hangout. Good chance for everyone to get to know each other and check out some cars. It wouldn't be limited to just people on here really. Any day is good for me right now except tuesdays. I go back on nights in november so it would be an every other week for me then. Anybody have any ideas? I'd really like to do a two day cruise to anywhere with a overnight stay somewhere then come back the next day. Just to get away and chill somewhere different.
I don't know of any local cruise nights that are a regular thing, but I have been comtemplating asking everyone on here if they wanted to start meeting up on a certain night weekly or every other week somewhere just meet/eat and hangout. Good chance for everyone to get to know each other and check out some cars. It wouldn't be limited to just people on here really. Any day is good for me right now except tuesdays. I go back on nights in november so it would be an every other week for me then. Anybody have any ideas? I'd really like to do a two day cruise to anywhere with a overnight stay somewhere then come back the next day. Just to get away and chill somewhere different.
Last edited by blue98Z; 10-05-2010 at 07:12 AM.
#8168
TECH Senior Member
iTrader: (10)
Joined: May 2005
Posts: 5,353
Likes: 2
From: Bossier city,LA barksdale AFB
My car is down for a few weeks have the rear out of it! Just got done cleaning the crap out of the bottom of my car with simple green! Then i painted everything satin black When i got done with that i was in the zone so i through on my bmr k-member lol. took me like 4 hours by my self taking my time
b4
This is after 1st coat! it has 3 coats
b4
This is after 1st coat! it has 3 coats
#8171
is there anything planned for this weekend? i'm contemplating going to friday test and tune at thunder road, since I haven't been to a track since red river closed, and have never run my car on any track before. anyone else been to the track lately?
car still isn't running great, have yet to find the wiring problem yet... pcm still reading IAT sensor as faulty, and strangely my amp cuts out sound randomly here and there...
car still isn't running great, have yet to find the wiring problem yet... pcm still reading IAT sensor as faulty, and strangely my amp cuts out sound randomly here and there...
#8176
TECH Senior Member
iTrader: (96)
Joined: Aug 2007
Posts: 24,241
Likes: 83
From: Turnin' Wrenches Infractions: 005
Well hell if everyone in the trailer park pitches in and donates a piece of an f body we might be able to assemble a complete car. We can take turns using it, so we will have a sweet ride when we take our sisters out on dates.
#8178
TECH Senior Member
iTrader: (10)
Joined: May 2005
Posts: 5,353
Likes: 2
From: Bossier city,LA barksdale AFB
That going in or out? if its going in i lube the hell out cams b4 i install them. especially if they are not going to be running in a day or to. If its just a quick cam swap i just oil it down because it will be running soon. If its a motor build and it can be a while i lube it up good! it looks a little dry other then the 1st cam bearing. only reason i say this is because ive had friends wipe out some cam bearings from not lubing enough.
#8179
TECH Senior Member
iTrader: (10)
Joined: May 2005
Posts: 5,353
Likes: 2
From: Bossier city,LA barksdale AFB
Well just did it! On the way
Quick performance f-body 9"
narrowed 2.5" each side
35 spline CM drag spool
35 spline moser axles
Strange Nodular Iron S-Case, Aluminum Daytona Pinion Support, 1350 Billet Steel Yoke, Motive Performance Gears, & Timken Bearings
4.30 gears
$2,100 shipped!!!
Quick performance f-body 9"
narrowed 2.5" each side
35 spline CM drag spool
35 spline moser axles
Strange Nodular Iron S-Case, Aluminum Daytona Pinion Support, 1350 Billet Steel Yoke, Motive Performance Gears, & Timken Bearings
4.30 gears
$2,100 shipped!!!