Ok found my pos. battery cable loose.When I tightened it up I striped it.Tried to drive it to the parts house but on the way it started cutting out and went dead......I installed a new battery then found out I fried the alternator.I had it rebuilt today and it wont charge??? The guy that rebuilt it tried it on the tester before I left with it so I know the alt. is good.The car is a 2000 z28.! big wire +1 little wire....thanks
__________________

 

Little wire has to show 12v+ when the key is on to tell the alternator to turn on. I believe its called the exciter wire. Its a direct line to the computer.

 

I know its pluged in cause I felt snap....but I'll ckeck it....it could be broke inside the plastic...........

 

You should verify it is getting 12v+ was what I was getting at.

 

ok....got 9.45 going into the plug w/the key on....when i stick the prob in the front side of the plug 0.0 .Then if i wiggle the wire I get voltage to the front side of the plug.I think the wire is broke inside the plug.As 4 the 9.45 reading not sure if i have the metter set right.....i got it on DCV @ 20.0.....can i take the plug apart ???

 

I'd go rob one from the junk yard. I'm pretty sure most GM cars have the same connector.
Shouldn't be more than a couple bucks doing it the honest way.

 

yep.....no junkyards close...waiting on the tigers to play ball...lol

 

It's hard to play football without a quarterback.

 

or a head coach

 

or a offencive coordinator !!!!!!!!!!!!1

 

THESE are the Saints I've grown to know and love!
We're actually up now, got the field goal. 16-14. I bet that poor bastard has been kicking 12 hour days.

 

I had my first street "race" this evening in a LONG time. A blue nova with white stripes and big chrome wheels revved at me at a stop light. I destroyed him in my wife's "minivan". Ran from a dig up to about 70mph. He turned off rather than pull up beside me.
Probably see it on Craigslist in the next couple hours.

 

How you gonna pick on people in the mini-van while drinking icees???? that's uncalled for

 

I've had that plug break before. It will cause you all kinds of grief!

 

Nope, he gonna put some NOSSSSSSS on it and smoke you next time.

Seriously, when is the last time you street raced the Z and did you win or lose?

My last race was against Josh R. in Mexico and I lost by about 1 or 1/2.
Second to last race was about 6 months ago to an unknown TA and I won that one, as we approached triple digits on the outskirts of Mexico, I was about to start putting bus lengths on him then we had to shut it down bc of traffic. I think he was stock. Last one before that was too long ago to remember.

Anyone else care to share any?

 

My last street race was about 10 years ago...I was a 17" big wheel with slicks on the rear. I was up against this old man with his supercharged Scooter....I had the pull of the dig but once his battery went into overdrive he started pulling on me...I would've sucked up the distance but we were in the pasta aisle and we were coming up on the frozen food section in walmart and had to shut it down...

If I ever see him again he's going down!!

 

^^lol

 

Just got a 90mm maf and need the adapter harness....anyone here have one by chance? if so how much? I'd rather buy local than wait for shipping

 

Isn't that equivalent to like 3 1/2" or 4"? I'd go to the Depot or Lowe's to see if I could find that size hose and some band clamps. Done!

 

If you are talking about the wiring harness napa part ec83 will have to cut and solder if it is a stock 85mm type