Went to the track yesterday...
Thread Starter
11 Second Club
Joined: Jul 2002
Posts: 56
Likes: 0
From: Orange Park, FL
Went to the track yesterday... Looking forward to playing with the 100 shot for some new times. Something wasn't working right. I had my 15 lbs bottle filled that morning. Got it warmed up to 900 psi. Went for a run. Felt like the N2O was sputtering all the way down the track. I figured the bottle pressure needed to be higher. I made sure I had 1000 psi for the second run. Took off the line and felt like I had enough pressure and power to boot but then I felt the front end nose dive and nothing but "sputtering" all through the 1/4. Any suggestions?
I have a TNT Wet fogger F1 kit with MSD digital window switch. Using the 100 jets.
I was wondering what happens to a silinoid(sp) when they go bad?
I have a TNT Wet fogger F1 kit with MSD digital window switch. Using the 100 jets.
I was wondering what happens to a silinoid(sp) when they go bad?
Thread Starter
11 Second Club
Joined: Jul 2002
Posts: 56
Likes: 0
From: Orange Park, FL
Well thank you!!! I had a problem a few weeks back at the track with my bottle blanket switch the wires had come off. So I thought about your question and wondered if maybe some other wires were off. I looked at the 'noid switches and their wiring looked good. I looked at my WOT switch and the two wires going to it were only half on the terminal. Either they vibrated off or someone was messing around under there. I am going to hope they just vibrated off. So thanks for the wire idea!
Just need to get oout there and see if that works!
Just need to get oout there and see if that works!
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Well thank you!!! I had a problem a few weeks back at the track with my bottle blanket switch the wires had come off. So I thought about your question and wondered if maybe some other wires were off. I looked at the 'noid switches and their wiring looked good. I looked at my WOT switch and the two wires going to it were only half on the terminal. Either they vibrated off or someone was messing around under there. I am going to hope they just vibrated off. So thanks for the wire idea!
Just need to get oout there and see if that works!
Just need to get oout there and see if that works!
Thread Starter
11 Second Club
Joined: Jul 2002
Posts: 56
Likes: 0
From: Orange Park, FL
Going to take the wires back off and try to crimp them a little tighter in the mean time.