MS4 , LS6 heads , cometic gaskets
Nick
Im running a MS4, 243s and stock gm MLS gaskets. the Heads will work fine, cam will too. Piston to valve is VERY close assuming a stock .055 compressed gasket is used.
If those 243's have been milled at all, You will have to flycut no getting arround it either.
If they havent and you want this to be at all safe without flycutting, youll need to run a stock gm MLS gasket. they are 40 for both no need for cometics.
Im running a MS4, 243s and stock gm MLS gaskets. the Heads will work fine, cam will too. Piston to valve is VERY close assuming a stock .055 compressed gasket is used.
If those 243's have been milled at all, You will have to flycut no getting arround it either.
If they havent and you want this to be at all safe without flycutting, youll need to run a stock gm MLS gasket. they are 40 for both no need for cometics.
thanks a lot , what is your mods ? how many rwhp did u get at the dyno ?
Last edited by PONTIAC SLP; Jan 8, 2009 at 10:22 AM.
Trending Topics
The Best V8 Stories One Small Block at Time


