bottle mounting question
the line runs under the console right there at the back, and up to the engine bay...I mounted a autometer N2O gauge in my cupholder with a peice of aluminum around it...
The little boot on the blowdown was on it when i bought it...????
The little boot on the blowdown was on it when i bought it...????
TECH Fanatic
Joined: Dec 2002
Posts: 1,084
Likes: 0
From: Bring it........ b*tch
Originally Posted by angst911
cool... where did you go through the body to get into the engine bay? I think that's more what I was asking when I said where did you run the line.....
I'm guessing that's where he ran the N20 line.
Launching!
Joined: Jun 2003
Posts: 241
Likes: 0
From: Kansas City
JxxxOxxxE, looks good. Nice braket spacers. Is that a 10lb bottle under that? You said NX right?
If you use the 5177 kit you must cut the lower part of the larger bottle braket between the 2 mounting holes and bend them facing straight down. Then drill 2 new holes in order to mount to the tunnel. If I had to do again, I'd do it like JxxxOxxxE's
If you use the 5177 kit you must cut the lower part of the larger bottle braket between the 2 mounting holes and bend them facing straight down. Then drill 2 new holes in order to mount to the tunnel. If I had to do again, I'd do it like JxxxOxxxE's
its a 10 lb bottle with the regular brackets that came with the TNT kit. Ones kinda tall, the other is short. I still had to use the spacers though...There is a NOS heater on it too...
Believe it or not, it does make an extremely good arm rest in the back...Hell my brother fell asleep on it on a trip to texas...and the whole reason for mounting it there was for the ease of opening it...
Believe it or not, it does make an extremely good arm rest in the back...Hell my brother fell asleep on it on a trip to texas...and the whole reason for mounting it there was for the ease of opening it...
