Went out to run Real Street (275 radial class) this weekend and got a new best.....
#21
Race your car!
iTrader: (50)
When I was running my car n/a I had goodyear radials on it (junk I know, but someone has to test stuff ) and they worked the best at 18.5 psi. Any more and they wouldn't hook, any less and they would just squirm on the track (see the marks, looked like snake tracks) and the whole car would vibrate. Annoying feeling for sure and that was at a low power level.. hitting it with power and having that happen must be un-nerving for sure.
#23
TECH Junkie
Thread Starter
iTrader: (10)
Join Date: Nov 2002
Location: Deerfield Beach, FL
Posts: 3,672
Likes: 0
Received 0 Likes
on
0 Posts
Here's another good pic one of the guys just posted up today on yellow bullet:
This was first round eliminations after I turned the progressive back down, was a beautiful launch!
This was first round eliminations after I turned the progressive back down, was a beautiful launch!
#24
12 Second Club
iTrader: (7)
Join Date: Mar 2008
Location: Mid-Missouri
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
Congrats for sure!!! Especially being that heavy, damn. Willing to share anymore on the squared LS1? Keep it up, litterally. Love to see the wheels off the ground. I hope to be able to do that 1 day.
#27
TECH Senior Member
iTrader: (2)
car is damn impressive. devon, it was only a few weeks ago you were over my house and we were talkign about how hard it would be to hook your car on that tiny 275/60. well ****, your combo works! good luck. hopefully i get to join you for an event or two this year.
i feel embarrassed with my underperforming 325 radial combo!
i feel embarrassed with my underperforming 325 radial combo!
#29
TECH Junkie
Thread Starter
iTrader: (10)
Join Date: Nov 2002
Location: Deerfield Beach, FL
Posts: 3,672
Likes: 0
Received 0 Likes
on
0 Posts
No, it's got a decent bit of weight reduction, but it's also got a lot of weight in it and i'm 265, without me and without a bottle the car is 3085 with a 10 pt chromemoly cage and still has all stock k member and a arms and stuff. Stock brakes out back, aerospace up front.
#30
TECH Junkie
Thread Starter
iTrader: (10)
Join Date: Nov 2002
Location: Deerfield Beach, FL
Posts: 3,672
Likes: 0
Received 0 Likes
on
0 Posts
car is damn impressive. devon, it was only a few weeks ago you were over my house and we were talkign about how hard it would be to hook your car on that tiny 275/60. well ****, your combo works! good luck. hopefully i get to join you for an event or two this year.
i feel embarrassed with my underperforming 325 radial combo!
i feel embarrassed with my underperforming 325 radial combo!
#33
TECH Junkie
Thread Starter
iTrader: (10)
Join Date: Nov 2002
Location: Deerfield Beach, FL
Posts: 3,672
Likes: 0
Received 0 Likes
on
0 Posts
Everyone says the car will go faster with a glide, so I'm going to give it a try, right now I can't leave on more than 40% without standing her up and I've still got more jet to throw at it. They also said I'm just running through didst gear and it's wasting power and that with the glide it'll keep it in the peak power band longer and motor through. Like I said, figure I'll give it a try.
#34
10 Second Club
iTrader: (3)
Well, I guess the whole point is to get as much power in as soon as possible. Hell, get an air shifter and all you'll have to do is release the trans brake and keep her straight.
I've thought of sticking a glide in mine with a ton of gear when I get back to 1/8th mile racing
I've thought of sticking a glide in mine with a ton of gear when I get back to 1/8th mile racing
#37
Race your car!
iTrader: (50)
Definately let me know how the glide works out, and what gearset are in it. I'm seriously considering one myself for mucht eh same reason. I'm not standing my junk up (at least until the lw front end **** goes on after that who knows) but keeping the motor in right spot is what I'm more intrested.
If possible, weigh the 2 tranny's too... I'm also intrested to see what they weigh (crossmember and driveshaft too if possible for best possible accuracy)
If possible, weigh the 2 tranny's too... I'm also intrested to see what they weigh (crossmember and driveshaft too if possible for best possible accuracy)
#38
TECH Junkie
Thread Starter
iTrader: (10)
Join Date: Nov 2002
Location: Deerfield Beach, FL
Posts: 3,672
Likes: 0
Received 0 Likes
on
0 Posts
Definately let me know how the glide works out, and what gearset are in it. I'm seriously considering one myself for mucht eh same reason. I'm not standing my junk up (at least until the lw front end **** goes on after that who knows) but keeping the motor in right spot is what I'm more intrested.
If possible, weigh the 2 tranny's too... I'm also intrested to see what they weigh (crossmember and driveshaft too if possible for best possible accuracy)
If possible, weigh the 2 tranny's too... I'm also intrested to see what they weigh (crossmember and driveshaft too if possible for best possible accuracy)
Driveshafts won't be a fair comparison, I'm going from steel to chromemoly, I got a friend that can get me a chromemoly one made for half what I paid for my steel and the chromemoly is lighter and stronger, so I'm gonna jump on it.