How much timeing do i need to pull??please help
id personally put a ngk 7 non projected plug in it and start around 20 degrees of timing and go from there. ofcourse that is my personal opinion and would feel comfortable starting there.
good luck.
good luck.
get rid of the TR6's for some 7's.... run some good fuel and i'd say pull 7 degrees to be safe..... 2 degrees per 50 hp plus 1 till you get a good read on the timing marks on the plug....
but get rid of the TR6's...
but get rid of the TR6's...
Thread Starter
On The Tree
Joined: Jul 2009
Posts: 146
Likes: 0
From: Moore, OK
Wow the TR-6s are that bad???Why the TR-7s?And is that -2deg per N20 HP(shot)??Thank you guys for helping.I belong to another forum(not going to say there name) and all they do is complain if i dont search,or get cocky.So once agine thank you for your help
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Robert
Thread Starter
On The Tree
Joined: Jul 2009
Posts: 146
Likes: 0
From: Moore, OK
Wow thats alot for a 150 shot.This is my DD so i think i will keep it at 125 with tr-6,lingenfelter pump,and some 42#injectors.Thank you guys for all your help.You have all been a awsome.
