CamaroRick

iTrader: (24)

Do you have a close up pic of where the feed line goes into the bottle? The way mine sits without shimming yet, is real close, i ordered a 6an 45* to try. I wont know till i get the 6an line from N2Outlet. Im definatly gonna shim the front mount.

1BADAIR

iTrader: (1)

will get pics tommorrow. i have this one but I just remembered I changed the bottle valve cause this one didn't have a spot for a gauge and the new one is a 45

CamaroRick

iTrader: (24)

do u have a pic wit the line attached? seems like a close angle from your pics

CamaroRick

iTrader: (24)

i tried shimming it, but it was way too close, i am using the 860 bracket/ bottle heater on the 960 platform, seems even with shimming it wont work, the bottom bracket need to be about 2 inches lower to fit in the rear "indent" part of the body.

I ended up making my own bottle platform that bolts up, no drilling no cutting it just bolts up using existing holes

just painted it ill get some pics up

CamaroRick

iTrader: (24)

paints wet, ill install it tomorrow and get pics of how it sits. edit done