Alright well for some reason my spray isnt working, my kit is a Cold Fusion wet shot system with a MSD Digital window switch......

I have tried testing it by un hooking my fuel line with the bottle closed (car off) window switch setting at 0rpms and activating the kit and nothing happens no click no nothing......

So far i have cleaned all the grounds and replaced the WOT switch and since i didnt hook up the kit myself im not sure how to bypass the window switch....

The thing that gets me the last time i tried to spray her the car went really rich afr's went to 10.2's so im assuming the fuel noid is working but not the n20 noid any help would be great!!!!!

 

Sounds like a wiring issue, make sure all the connections are there.

 

Where is the window switch getting its signal and what is the mode set to?

What's the bottle pressure when you're trying to spray?

Are both solenoids wired through the same points?

Nick

 

mine just did the same thing, but i havent gotten it to work yet....

 

Sorry it took me so long to respond but i bypassed the window switch eliminating it completely and everything is working fine now......

Thanks guys.....

 

Those digital msd's are garbage on a COP setup. Do a search on how many people have had problems with them

 

Oh i know but i already miss the advantage of a window switch lol.....

 

hey brandon, if you need to barrow a window switch i have one with my kit im waiting to install.

 

Check and make sure the window switch was getting a tach signal and is set to 4cyl mode.

 

MicroEDGE.

Nick

 

Trying to figure out who you are lol.....

And im not sinking anymore money into this setup until the motor goes boom that way i can set it up they way i want next time around......