Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

stock internal ls1+spray

Thread Tools
 
Search this Thread
 
Old 06-12-2010 | 04:55 PM
  #41  
odarabla's Avatar
10 Second Club
iTrader: (1)
 
Joined: Sep 2007
Posts: 1,500
Likes: 0
From: In Uranus!
Default

I know this isn't what you were looking for but I went 10.90@123mph 1.46 60ft. N/A in a full weight (3600lbs) 2002 Z28 H/C/I car, built tranny and strange 12bolt rear end. Went 10.28@132mph with a 1.46 60ft. Didn't hit the spray until about the 300ft. mark. This was on a 125 shot. I wish I knew what it would do if I left on the spray. Bad track prep that night, couldn't hook.
Old 06-12-2010 | 04:57 PM
  #42  
01SOMZ28's Avatar
11 Second Club

iTrader: (37)
 
Joined: Jan 2009
Posts: 950
Likes: 4
From: Lincoln, NE
Default

Stock longblock, longtubes, lid, ORY dumped, stock 10 bolt, 3200 stall and 555R's with a 150 shot here. Been to the track one time....only managed to get a 11.7 @ 118 1.9 60'
Old 06-13-2010 | 04:35 PM
  #43  
fly pantera's Avatar
Thread Starter
12 Second Club
iTrader: (9)
 
Joined: Jun 2006
Posts: 623
Likes: 2
From: SanMarcos,TX
Default

Originally Posted by 01SOMZ28
Stock longblock, longtubes, lid, ORY dumped, stock 10 bolt, 3200 stall and 555R's with a 150 shot here. Been to the track one time....only managed to get a 11.7 @ 118 1.9 60'
man ur car is putting down some serious power.
Old 06-13-2010 | 04:37 PM
  #44  
fly pantera's Avatar
Thread Starter
12 Second Club
iTrader: (9)
 
Joined: Jun 2006
Posts: 623
Likes: 2
From: SanMarcos,TX
Default

im hoping to trap atleast a 130.just praying that the trans and rear can survive 3 runs.raceweight should be 3100 or lower



Quick Reply: stock internal ls1+spray



All times are GMT -5. The time now is 02:29 PM.