Notices
Nitrous Oxide Installation | Tuning | Products

Official Stock Cube Nitrous List

 
Old 02-16-2010, 03:10 PM
  #1  
9 Second Club
Thread Starter
iTrader: (21)
 
camscam02's Avatar
 
Join Date: Apr 2006
Location: sacramento, CA
Posts: 3,240
Likes: 0
Received 0 Likes on 0 Posts
Default Official Stock Cube Nitrous List

Well ladies and gentlemen your wishes have been granted and the Stock Cube List will now be a sticky and will be kept up to date from now on. Time to celebrate for all us low income folks!

"Official Stock Cube Nitrous List"


Please submit in this format: It will be kept as a Top 50 List

ET @ MPH - 60' - Size Shot - Date - User Name - Category--FS/SS

9.78 @ 140.5 - 1.36 - 200shot - 2/13/10 - Camscam02 - Cam/Nitrous--SS


Categories are:
Heads/Cam/Nitrous
Cam/Nitrous
Bolt-ons/Nitrous

FS stands for forged shortblock, meaning different rods, pistons, crank, etc.
SS stands for stock shortblock, meaning stock above components. Highlighted in Blue


#---ET @ MPH - 60' - Size Shot - Date - Username - Category--FS/SS
  1. -8.75 @ 153.7 - 1.23 - 300shot - 7/14/13 - WhiteLTone - Heads/Cam/Nitrous--FS
  2. -8.93 @ 150.0 - 1.30 - 300shot - 3/30/13 - Thadd - Heads/Cam/Nitrous--FS
  3. -8.94 @ 151.0 - 1.28 - 375shot - 8/27/16 - Killer 5.3 - Heads/Cam/Nitrous--SS
  4. -8.95 @ 149.2 - 1.20 - 250shot - 10/20/13 - Bader Al-Sharshani - Cam/Nitrous--SS
  5. -9.23 @ 146.0 - 1.25 - 275shot - 2/15/13 - Trans Am Dan - Heads/Cam/Nitrous--FS
  6. -9.27 @ 144.6 - 1.31 - 300shot - 11/18/17 - jblankenship - Heads/Cam/Nitrous--SS
  7. -9.30 @ 144.5 - 1.33 - 150shot - 11/13/10 - 02SS:ZEUS - Heads/Cam/Nitrous--FS
  8. -9.31 @ 146.1 - 1.37 - 300shot - 5/31/13 - Carter01 - Heads/Cam/Nitrous--SS
  9. -9.32 @ 142.8 - 1.33 - 200shot - 9/9/06 - Smith - Heads/Cam/Nitrous--FS
  10. -9.34 @ 140.1 - 1.26 - 200shot - 5/18/12 - NOYZEE - Heads/Cam/Nitrous--SS
  11. -9.36 @ 143.9 - 1.30 - 275shot - 5/4/12 - Camscam02 - Heads/Cam/Nitrous--SS
  12. -9.36 @ 145.0 - 1.39 - XXXshot - 11/9/08 - BAKED - Heads/Cam/Nitrous--FS
  13. -9.40 @ 142.0 - 1.34 - 300shot - 11/3/xx - Big Mike--FS
  14. -9.43 @ 147.2 - 1.45 - xxxshot - 5/9/12 - Badass 2003 Z06 - Heads/Cam/Nitrous Z06--FS
  15. -9.45 @ 142.0 - 1.32 - 300shot - xx/xx/xx - Tuff - Heads/Cam/Nitrous--FS
  16. -9.49 @ 141.0 - 1.29 - 200 shot -7-20-12 - Brett Walker - Heads/Cam/Nitrous--SS
  17. -9.58 @ 138.6 - 1.32 - 150shot - 6/9/07- Sonic Snake - Heads/Cam/Nitrous--FS
  18. -9.59 @ 138.8 - 1.35 - 400shot - 11/5/11 - ProTreeRacing - Cam/Nitrous--FS
  19. -9.61 @ 141.0 - 1.38 - 300shot - 9/6/12 - 1320vette - Heads/Cam/Nitrous--FS
  20. -9.62 @ 137.0 - 1.32 - 250shot - 8/xx/09 - 91zls1 - Heads/Cam/Nitrous--SS
  21. -9.64 @ 141.5 - 1.40 - 250shot - 4/5/14 - shortdog - Heads/Cam/Nitrous--FS
  22. -9.70 @ 139.0 - 1.35 - 250shot - 11/5/xx - ATVracr - Heads/Cam/Nitrous
  23. -9.74 @ 138.0 - 1.50 - 200shot - 4/21/16 - lsxjustin- Heads/Cam/Nitrous--FS
  24. -9.74 @ 137.5 - 1.37 - 150shot - 9/4/10 - Nasti98z - Heads/Cam/Nitrous--FS
  25. -9.74 @ 1??.0 - 1.46 - 150shot - 3/6/10 - cammedc6 - Heads/Cam/Nitrous--SS LS2
  26. -9.74 @ 136.8 - 1.33 - 250shot - 9/1/09 - JMill96Z - Heads/Cam/Nitrous--FS
  27. -9.78 @ 133.0 - 1.32 - 175shot - 12/11/04 - next
  28. -9.79 @ 135.3 - 1.39 - 100shot - 10/26/14 - samsel450r - Heads/Cam/Nitrous--FS
  29. -9.80 @ 142.0 - 1.35 - 240shot - xx/xx/xx - smokeum99ta - Heads/Cam/nitrous
  30. -9.85 @ 136.0 - 1.27 - xxxshot - 09/09/xx - 9badtrans9 - Cam/Nitrous--SS
  31. -9.92 @ 138.0 - 1.28 - 125shot - 12/11/10 - N2RacingLS1's - Heads/Cam/Nitrous
  32. -9.92 @ 134.6 - 1.35 - 150shot - 10/06/13 - GIMPY02 - Cam/Nitrous--SS
  33. -9.93 @ 136.0 - 1.41 - 200shot - 11/30/12 - 02SOMWS6 - Cam/Nitrous--FS
  34. -9.93 @ 134.0 - 1.37 - 175shot - 10/xx/06 - Justa z - Heads/Cam/Nitrous
  35. -9.94 @ 133.0 - X.XX - 200shot - xx/xx/xx - MOSTDELUXE
  36. -9.96 @ 134.0 - 1.31 - 150shot - xx/xx/xx - ztwentyateu - Heads/Cam/Nitrous--FS
  37. -9.97 @ 132.6 - 1.44 - 150shot - xx/xx/xx - Charles Cyrus
  38. -9.99 @ 138.5 - 1.48 - 200shot - 10/26/13 - Rhino79--SS
  39. 10.00 @ 135.x - 1.45 - 200shot - 11/6/11 - Second_2_None - Cam/Nitrous--SS
  40. 10.00 @ 133.9 - 1.38 - 150shot - 11/18/07 - Pro Stock John - Heads/Cam/Nitrous
  41. 10.01 @ 136.0 - 1.40 - 275shot - 9/xx/08 - TRMIN8R - Heads/Cam/Nitrous--FS
  42. 10.01 @ 134.7 - 1.48 - 175 shot - 02/15/14 - 01_Ram-Air - Cam/Nitrous--SS
  43. 10.02 @ 136.0 - 1.46 - 150shot - 10/xx/09 -SpeedyWs6- Cam/Nitrous-SS
  44. 10.06 @ 136.9 - 1.40 - 150shot - 10/7/11 - ren987 - Cam/Nitrous -- SS
  45. 10.08 @ 134.1 - 1.48 - 200shot - 10/17/09 - ryarbrough - Heads/Cam/Nitrous--FS
  46. 10.12 @ 133.3 - 1.42 - 200shot - 10/23/11 - second_2_none - Cam/Nitrous -- SS
  47. 10.15 @ 134.8 - 1.36 - 150shot - 11/4/13 - 2 Stroke Racer - Cam/Nitrous--SS
  48. 10.15 @ 132.2 - 1.40 - 200shot - 2/12/11 - Hardcore - Heads/Cam/Nitrous--SS
  49. 10.22 @ 132.2 - 1.41 - 175shot - 1/29/12 - Sofls1 - Heads/Cam/Nitrous- SS
  50. 10.24 @ 132.5 - 1.46 - 125shot - 11/2/07 - Ls1speedaddict - Heads/Cam/Nitrous

Previous List: https://ls1tech.com/forums/nitrous-o...us-list-7.html

Enjoy and Good Luck, Keep these small motors together!

Last edited by shortdog; 11-21-2017 at 08:15 AM.
camscam02 is offline  
Old 02-16-2010, 03:11 PM
  #2  
9 Second Club
Thread Starter
iTrader: (21)
 
camscam02's Avatar
 
Join Date: Apr 2006
Location: sacramento, CA
Posts: 3,240
Likes: 0
Received 0 Likes on 0 Posts
Default

Again, this will be kept as a Top 50 list, if your time isnt faster then the 50th car please do not submit, and if it is, please submit in the attached format so it will make it easier on myself and be more organized.

Thanks for everything and look forward to seeing this grow. Everything has been updated from the old thread!

Thanks,
Cameron
camscam02 is offline  
Old 02-17-2010, 07:06 PM
  #3  
Teching In
 
9badtrans9's Avatar
 
Join Date: Sep 2006
Location: Rockford IL
Posts: 20
Likes: 0
Received 0 Likes on 0 Posts
Default

Forgot to say that mine is a stock short block. Dont know if it really matters but id figured id tell you.
9badtrans9 is offline  
Old 02-17-2010, 07:10 PM
  #4  
9 Second Club
Thread Starter
iTrader: (21)
 
camscam02's Avatar
 
Join Date: Apr 2006
Location: sacramento, CA
Posts: 3,240
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by 9badtrans9 View Post
Forgot to say that mine is a stock short block. Dont know if it really matters but id figured id tell you.
Cool deal. Whats that thing weigh by chance and how much are you putting through it, our setups are very similiar.
camscam02 is offline  
Old 02-17-2010, 07:28 PM
  #5  
Teching In
 
9badtrans9's Avatar
 
Join Date: Sep 2006
Location: Rockford IL
Posts: 20
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by camscam02 View Post
Cool deal. Whats that thing weigh by chance and how much are you putting through it, our setups are very similiar.
Weighs 3140 with me in it. Still has stock k member upper and lower control arms. Sprayin 250. Gotta put another stock short block in it. Wanna try to get it down to the 9.50s on a stock short block. Whats all done to your car if you dont mind me asking?
9badtrans9 is offline  
Old 02-17-2010, 07:33 PM
  #6  
9 Second Club
Thread Starter
iTrader: (21)
 
camscam02's Avatar
 
Join Date: Apr 2006
Location: sacramento, CA
Posts: 3,240
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by 9badtrans9 View Post
Weighs 3140 with me in it. Still has stock k member upper and lower control arms. Sprayin 250. Gotta put another stock short block in it. Wanna try to get it down to the 9.50s on a stock short block. Whats all done to your car if you dont mind me asking?
Not bad. Moving pretty good.

Mine is 3400lbs with me in it, stock k member a arms, brakes, powersteering, abs, stock carpet etc stock hood. Spraying 200 with the ms3 and stock 241 heads. Should go faster on the 200 but when we went out it was pretty hot, been .86 139 on the 150 in about 1000DA less then the .78 pass.

Same as you, hoping for .50's in the 1/4 and actually trying to get to 5.90's in the 1/8. Very doable, just have to get weight out of the car.
camscam02 is offline  
Old 02-18-2010, 10:38 AM
  #7  
Teching In
 
9badtrans9's Avatar
 
Join Date: Sep 2006
Location: Rockford IL
Posts: 20
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by camscam02 View Post
Not bad. Moving pretty good.

Mine is 3400lbs with me in it, stock k member a arms, brakes, powersteering, abs, stock carpet etc stock hood. Spraying 200 with the ms3 and stock 241 heads. Should go faster on the 200 but when we went out it was pretty hot, been .86 139 on the 150 in about 1000DA less then the .78 pass.

Same as you, hoping for .50's in the 1/4 and actually trying to get to 5.90's in the 1/8. Very doable, just have to get weight out of the car.
Thanks. I was kind of dissapointed with my car. On a 150 shot the car went 10.08. when i bumped it up to 250 i only picked up the 2 tenths of a second. Dont really know why but i think it should of been low 9.70s high 9.60s. Im runnin the ms4 cam and i heard alot of people say that cam doesnt like that spray. What do you think?
9badtrans9 is offline  
Old 02-18-2010, 10:50 AM
  #8  
9 Second Club
Thread Starter
iTrader: (21)
 
camscam02's Avatar
 
Join Date: Apr 2006
Location: sacramento, CA
Posts: 3,240
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by 9badtrans9 View Post
Thanks. I was kind of dissapointed with my car. On a 150 shot the car went 10.08. when i bumped it up to 250 i only picked up the 2 tenths of a second. Dont really know why but i think it should of been low 9.70s high 9.60s. Im runnin the ms4 cam and i heard alot of people say that cam doesnt like that spray. What do you think?
Hmmm yea we pick up 2 tenths going from 150 to 200 so I would expect aroud another 2 tenths going to a 250. As far as the cam it could be hurting you with that big of shot, it might not have enough exhaust to get all the heat and pressure out of it. But you may also have a converter problem as well that could be holding you back. Hard to tell. The thing sixty foots great though.
camscam02 is offline  
Old 02-25-2010, 09:52 PM
  #9  
10 Second Club
iTrader: (4)
 
sleeperstyle's Avatar
 
Join Date: Jul 2004
Location: hatboro, pa
Posts: 1,284
Likes: 0
Received 0 Likes on 0 Posts
Default

good work on the list, it is nice to see where i stand 3rd fastest cam-only isn't bad

my motor is stock internals ( SS )
sleeperstyle is offline  
Old 03-07-2010, 01:28 AM
  #10  
Staging Lane
iTrader: (5)
 
Join Date: Jul 2008
Location: Grand Prairie, Tx
Posts: 80
Likes: 0
Received 0 Likes on 0 Posts
Default

9.74 @ ? - 1.46 - Progressive 150 shot - 3/6/10 - cammedc6 - Heads/Cam/Nitrous--SS

Slip and Video here
https://ls1tech.com/forums/single-di...-1st-pass.html
cammedc6 is offline  
Old 03-08-2010, 12:56 AM
  #11  
9 Second Club
Thread Starter
iTrader: (21)
 
camscam02's Avatar
 
Join Date: Apr 2006
Location: sacramento, CA
Posts: 3,240
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by cammedc6 View Post
9.74 @ ? - 1.46 - Progressive 150 shot - 3/6/10 - cammedc6 - Heads/Cam/Nitrous--SS

Slip and Video here
https://ls1tech.com/forums/single-di...-1st-pass.html
Not sure how to categorize it, but it is stock shortblock so I guess ill throw it up there. Congrats!
camscam02 is offline  
Old 03-15-2010, 10:59 AM
  #12  
8 second mod
iTrader: (37)
 
Noyzee's Avatar
 
Join Date: Nov 2002
Location: East Side Performance! mASShole
Posts: 17,881
Likes: 0
Received 0 Likes on 0 Posts
Default

so it looks like 9.7 is stock short block record? hmmmmmm
Noyzee is offline  
Old 03-15-2010, 01:10 PM
  #13  
9 Second Club
Thread Starter
iTrader: (21)
 
camscam02's Avatar
 
Join Date: Apr 2006
Location: sacramento, CA
Posts: 3,240
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Noyzee View Post
so it looks like 9.7 is stock short block record? hmmmmmm
9.64 I believe. its not on the list.

Im not sure how long it will take you to be ready, but we should be out in a month or two and it will be in the 9.50's, so id shoot for that.
camscam02 is offline  
Old 03-15-2010, 02:09 PM
  #14  
8 second mod
iTrader: (37)
 
Noyzee's Avatar
 
Join Date: Nov 2002
Location: East Side Performance! mASShole
Posts: 17,881
Likes: 0
Received 0 Likes on 0 Posts
Default

i was hoping to be out this weekend, but its going to be 2 weeks to get my heads done. DDOOOHHHHH

9.5 with all stock bottom end, nice.
we shall see. im hoping to run high 9's on 100 shot. on a scale i did with 2 other cars i built thats what im thinking.
both cars are 346bolt on street cars in the 3500 pound range both with 100 shot went 10.4-10.5 so im thinking with mine set up a little closer to the edge and 300 pounds lighter and a better tranny/converter/suspention set up i think its doable. we shall see
Noyzee is offline  
Old 03-15-2010, 02:12 PM
  #15  
9 Second Club
Thread Starter
iTrader: (21)
 
camscam02's Avatar
 
Join Date: Apr 2006
Location: sacramento, CA
Posts: 3,240
Likes: 0
Received 0 Likes on 0 Posts
Default

Shoulda left the stock untouched heads on it. would have made it more fun. lol.

Seems like very realistic goals to me.
camscam02 is offline  
Old 03-15-2010, 03:57 PM
  #16  
8 second mod
iTrader: (37)
 
Noyzee's Avatar
 
Join Date: Nov 2002
Location: East Side Performance! mASShole
Posts: 17,881
Likes: 0
Received 0 Likes on 0 Posts
Default

accually, i had a set of 5.3 heads of a truck i did about 3 years ago. so i just sent those to tea for a little work and valve job etc. should be good when its done. not crazy, but trying to fit in a 2500 budget, and it looks good right now. hehe
cam and push rods ordered today
Noyzee is offline  
Old 03-19-2010, 07:51 AM
  #17  
9 Second Club
iTrader: (14)
 
BAKED's Avatar
 
Join Date: Oct 2004
Location: kentucky
Posts: 1,600
Likes: 0
Received 0 Likes on 0 Posts
Default

What cam did you go with?
BAKED is offline  
Old 03-19-2010, 09:06 AM
  #18  
8 second mod
iTrader: (37)
 
Noyzee's Avatar
 
Join Date: Nov 2002
Location: East Side Performance! mASShole
Posts: 17,881
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by BAKED View Post
What cam did you go with?
custom grind comp.
small cam, i stuck with my gut and kept it small.
it seems most people are worried about how big of a cam they can run and peak power, but from all my testing years back it seemed peak numbers came with big cams, but good track times came from smaller cams.

its in the 22x range tho
Noyzee is offline  
Old 03-29-2010, 10:16 PM
  #19  
Staging Lane
 
Join Date: Feb 2002
Location: Lake Geneva, WI
Posts: 82
Likes: 0
Received 0 Likes on 0 Posts
Default

9.62 @ 137mph - 1.32 - 250shot - 8/?/09 - 91zls1 - Heads/Cam/Nitrous--SS

99 camaro ss tr 224 224 563. 114 and ls6 ported heads and decked with zo6 springs. 11.2.1 comp NX wet kit, nitrodaves plate
This is at a 3600# race weight. Full interior, power everything, a/c, stereo system in back. TH400/vig 3200 stall, 9in 370 spool. 28x10.5's slicks, qa1's all the way around, umi torque arm, bmr lower control arms, bmr subframes, 6pt wolf cage, kirkey seats
91ZLS1 is offline  
Old 03-29-2010, 11:22 PM
  #20  
9 Second Club
Thread Starter
iTrader: (21)
 
camscam02's Avatar
 
Join Date: Apr 2006
Location: sacramento, CA
Posts: 3,240
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by 91ZLS1 View Post
9.62 @ 137mph - 1.32 - 250shot - 8/?/09 - 91zls1 - Heads/Cam/Nitrous--SS

99 camaro ss tr 224 224 563. 114 and ls6 ported heads and decked with zo6 springs. 11.2.1 comp NX wet kit, nitrodaves plate
This is at a 3600# race weight. Full interior, power everything, a/c, stereo system in back. TH400/vig 3200 stall, 9in 370 spool. 28x10.5's slicks, qa1's all the way around, umi torque arm, bmr lower control arms, bmr subframes, 6pt wolf cage, kirkey seats
Very very impressive. Got any pics or video?
camscam02 is offline  

Thread Tools
Search this Thread
Quick Reply: Official Stock Cube Nitrous List


About Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
 
  • Ask a Question
    Get answers from community experts
Question Title:
Description:
Your question will be posted in: