Big thanks to Nitrous Outlet!!!
#1
Staging Lane
Thread Starter
iTrader: (5)
Join Date: Jul 2008
Location: Grand Prairie, Tx
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Big thanks to Nitrous Outlet!!!
Thanks to the guys there for their great work. Grant for some of these pics, Chris for the good customer service, David Clark (Smurf) for the badazz install, and Nitro Dave himself for putting up with me and answering all my questions even after midnight.
Best on motor was 10.58 and goal was to hope to hit a 9.99 on spray. Figured it would take me a few passes to barely do that. Man was I wrong. Below was my first and only pass of the night b/c it was so busy and they didn't open the 1/4 mile till a couple hours after it got dark so water would stop seeping up through the track at the top end. The car still has a tad bit more in it b/c this run was with a safe ramp up on the progressive with a 150 shot and letting off a little up top b/c I was afraid I was going to hit my rev limiter. Their damn traps weren't working on the big end also and the 1000' was run over by a Pro Mod earlier that day. Hoping next time out for 9.5's.
http://www.youtube.com/watch?v=hlKKh...eature=channel
I am car #90
Progressive controller hidden in the tombstone on the C6. Switch panel in the ashtray.
Hard line, fuel cell, and timing retard on fuse box.
Old pic. Since then it has been updated with a black **** and cleaned up.
Best on motor was 10.58 and goal was to hope to hit a 9.99 on spray. Figured it would take me a few passes to barely do that. Man was I wrong. Below was my first and only pass of the night b/c it was so busy and they didn't open the 1/4 mile till a couple hours after it got dark so water would stop seeping up through the track at the top end. The car still has a tad bit more in it b/c this run was with a safe ramp up on the progressive with a 150 shot and letting off a little up top b/c I was afraid I was going to hit my rev limiter. Their damn traps weren't working on the big end also and the 1000' was run over by a Pro Mod earlier that day. Hoping next time out for 9.5's.
http://www.youtube.com/watch?v=hlKKh...eature=channel
I am car #90
Progressive controller hidden in the tombstone on the C6. Switch panel in the ashtray.
Hard line, fuel cell, and timing retard on fuse box.
Old pic. Since then it has been updated with a black **** and cleaned up.
#4
FormerVendor
iTrader: (25)
Andrew you have one impressive street car dude. I would love to sport that to work everyday....
9.7 on your very first nitrous pass ever is awesome and you have some good driving skills man..
Thank you for trusting us with your nitrous install and trusting our products!
Dave
9.7 on your very first nitrous pass ever is awesome and you have some good driving skills man..
Thank you for trusting us with your nitrous install and trusting our products!
Dave
#6
Staging Lane
Thread Starter
iTrader: (5)
Join Date: Jul 2008
Location: Grand Prairie, Tx
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Andrew you have one impressive street car dude. I would love to sport that to work everyday....
9.7 on your very first nitrous pass ever is awesome and you have some good driving skills man..
Thank you for trusting us with your nitrous install and trusting our products!
Dave
9.7 on your very first nitrous pass ever is awesome and you have some good driving skills man..
Thank you for trusting us with your nitrous install and trusting our products!
Dave
Thanks!
#7
On The Tree
iTrader: (2)
Join Date: Jul 2004
Location: Chicago
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
oh yeah
Congrads on theat pass I have a big smile on my face for you. I remember when I first hit the 10's so I know that felt good to you. Keep pushing and good luck. Thats a Bad *** Vette !!!!
Trending Topics
#11
Seeing your vid makes me excited. My car is down there right now getting Direct port . I too have there digital progressive controller amd it looks badass. Sweet ride
Last edited by BADMOON; 03-13-2010 at 01:34 AM.
#13
FormerVendor
iTrader: (25)
We made one for your car so that it can mount on the back deck.. Your bottle set up will look exactly like his..
Very Clean..
#14
See how his bottles are mounted.. Under the carpet there is an aluminum plate apoxy to the floor and the plate has removable studs incase you want to remove them in the future..
We made one for your car so that it can mount on the back deck.. Your bottle set up will look exactly like his..
Very Clean..
We made one for your car so that it can mount on the back deck.. Your bottle set up will look exactly like his..
Very Clean..
#15
FormerVendor
iTrader: (25)
Here in Texas I would not leave the bottles in the car in the heat of the day. If the back glass is tented it will help keep the heat of the sunlight off while running around with them in the car. You can also put our bottle blankets on to protect it from direct sunlight.
Dave
Dave