nitrous newbie
Thread Starter
Turd Gen Guy
iTrader: (63)
Joined: Dec 2008
Posts: 1,532
Likes: 3
From: andalusia, alabama
nitrous newbie ok im wanting to have ut where i can run a n/a tune and a nitrous tune but plan on having my car fully tuned by my tuner. question is can i use the microedge to run these two separate tunes or do i need something else.
Being as i got a sbc with dizzy i used an ignition box that pulls timing when the noids are activated.
For an coil on plug i "think" the interface will do that for you. Get the interface and microede from hsw and you'd be set.
For an coil on plug i "think" the interface will do that for you. Get the interface and microede from hsw and you'd be set.
Nick
Thread Starter
Turd Gen Guy
iTrader: (63)
Joined: Dec 2008
Posts: 1,532
Likes: 3
From: andalusia, alabama
What are motor is this going on? Are you looking for a device that allows you to run max N/A timing and pull timing when the nitrous is activated? If so, you'll want the Interface controller. MicroEDGE is a window switch, tps switch, a/f shut down, dual stage controller with built in gear lockouts and delays.
Nick
Nick
