C5_Pete

iTrader: (8)

Do you have to use a hard tube as a blowdown tube, or can you use braided 8an line?

I'm hoping I can use the braided line, as the hard line is just difficult to mount in my installation.

I have heard braided is not allowed in sanctioned events... not really sure if that matters to me or not...

Still would be nice to know, though.

Any referance material would be nice too.

Thanks

BarneyMobile

iTrader: (4)

To my understanding it is legal to run a braided line. I run a tube since its cheap and fit without an issue.

NitrousExpress

iTrader: (4)

Im sure we can setup you up with a custom hardline. Give me call at the shop tomorrow or Email me a pic of your bottle install and we can go from their. Here to help.

Graham @ NX

Detroitmuscle

iTrader: (16)

I believe a bulkhead is required with a braided line

NitrousExpress

iTrader: (4)

For braided line a -8 bulkhead is required.

Nitro Dave's Nitrous Outlet

iTrader: (25)

We have done it both ways. For some show car stuff we have fabed up custom hardline for the blow down tube.

I personally like using 8 an braided hose with the correct fittings. We offer custom pre bulked kits to fit your needs.. These are what I use on all our custom installs.

We offer different arrangements and colors.
Click here.

http://www.nitrousoutlet.com/catalog...=23&section=75

Nick@HSW

iTrader: (4)

Just make sure you have a bulkhead securing it to your floor pan and you're good.

Nick

C5_Pete

iTrader: (8)

thanks for the help guys...

I'm looking at the various options and will figure something out...

Beer99C5

iTrader: (21)

Here is what I did





Put a -8AN Bulkhead connector in the lil cubby hole passenger side.