C5 Z06 NX 150 Wet kit Install begins.
08-11-2010, 10:44 AM
#24
Install is turning out nicely. I will make a couple of suggestions.
Clock the bottle so that the bottle nipple is rotated down and at the rear of the car. This will make sure the pick up tube grabs the liquid as the g-force of the launch pulls it to the back of the bottle.
Where you have the nitrous solenoids mounted the 16ft main feed line that comes standard in the kit will not be long enough. It may be close if you swap the bottle around and run the feed line down the drivers side of the car instead.
Sticking with your plan what I would suggest is picking up a filter and an extention line the lenth you will need. You really need a filter anyways.. Then you can come off the bottle with the extention hose to the filter and then connect your main feed line on the oposite side of the filter.
This is the filter I would suggest. You can take it apart and clean it through out time. We can build the hoses to any lenth you may need.
http://www.nitrousoutlet.com/catalog...7&product=2765
Dave
Clock the bottle so that the bottle nipple is rotated down and at the rear of the car. This will make sure the pick up tube grabs the liquid as the g-force of the launch pulls it to the back of the bottle.
Where you have the nitrous solenoids mounted the 16ft main feed line that comes standard in the kit will not be long enough. It may be close if you swap the bottle around and run the feed line down the drivers side of the car instead.
Sticking with your plan what I would suggest is picking up a filter and an extention line the lenth you will need. You really need a filter anyways.. Then you can come off the bottle with the extention hose to the filter and then connect your main feed line on the oposite side of the filter.
This is the filter I would suggest. You can take it apart and clean it through out time. We can build the hoses to any lenth you may need.
http://www.nitrousoutlet.com/catalog...7&product=2765
Dave
08-11-2010, 01:45 PM
#26
TECH Apprentice
Thread Starter
Join Date: Nov 2009
Location: Kentucky
Posts: 367
Likes: 0
Received 0 Likes
on
0 Posts
Install is turning out nicely. I will make a couple of suggestions.
Clock the bottle so that the bottle nipple is rotated down and at the rear of the car. This will make sure the pick up tube grabs the liquid as the g-force of the launch pulls it to the back of the bottle.
Where you have the nitrous solenoids mounted the 16ft main feed line that comes standard in the kit will not be long enough. It may be close if you swap the bottle around and run the feed line down the drivers side of the car instead.
Sticking with your plan what I would suggest is picking up a filter and an extention line the lenth you will need. You really need a filter anyways.. Then you can come off the bottle with the extention hose to the filter and then connect your main feed line on the oposite side of the filter.
This is the filter I would suggest. You can take it apart and clean it through out time. We can build the hoses to any lenth you may need.
http://www.nitrousoutlet.com/catalog...7&product=2765
Dave
Clock the bottle so that the bottle nipple is rotated down and at the rear of the car. This will make sure the pick up tube grabs the liquid as the g-force of the launch pulls it to the back of the bottle.
Where you have the nitrous solenoids mounted the 16ft main feed line that comes standard in the kit will not be long enough. It may be close if you swap the bottle around and run the feed line down the drivers side of the car instead.
Sticking with your plan what I would suggest is picking up a filter and an extention line the lenth you will need. You really need a filter anyways.. Then you can come off the bottle with the extention hose to the filter and then connect your main feed line on the oposite side of the filter.
This is the filter I would suggest. You can take it apart and clean it through out time. We can build the hoses to any lenth you may need.
http://www.nitrousoutlet.com/catalog...7&product=2765
Dave
I have this filter. http://www.summitracing.com/parts/NOS-15550NOS/
Do you still think I will have a problem with length?
08-11-2010, 04:26 PM
#27
TECH Apprentice
Thread Starter
Join Date: Nov 2009
Location: Kentucky
Posts: 367
Likes: 0
Received 0 Likes
on
0 Posts
Okay feed line run. I had exactly enough line. Ran through the main harness grommet under the battery, under rocker trim, up trim piece along door sill and under carpet to bottle. Now just gotta do all the damn wiring...
08-12-2010, 11:56 AM
#31
TECH Apprentice
Thread Starter
Join Date: Nov 2009
Location: Kentucky
Posts: 367
Likes: 0
Received 0 Likes
on
0 Posts
08-12-2010, 02:00 PM
#33
TECH Apprentice
Thread Starter
Join Date: Nov 2009
Location: Kentucky
Posts: 367
Likes: 0
Received 0 Likes
on
0 Posts
08-12-2010, 02:11 PM
#34
8 second mod
iTrader: (37)
Join Date: Nov 2002
Location: East Side Performance! mASShole
Posts: 17,879
Likes: 0
Received 0 Likes
on
0 Posts
i like that a lot, i think i might try to make those, that way the trunk looks clean, i can toss my towels and cleaning **** down there
08-13-2010, 08:46 AM
#37
TECH Apprentice
Thread Starter
Join Date: Nov 2009
Location: Kentucky
Posts: 367
Likes: 0
Received 0 Likes
on
0 Posts
Okay I think this looks better. Sorry if you hate looking at pics then you should avoid my threads. I took these with a Nikon instead of my crappy Blackberry.
Still a long way to go...
Still a long way to go...
