Dart heads
Thread Starter
Joined: Sep 2004
Posts: 558
Likes: 7
From: South Texas
Dart heads Hey does any body know where I can send my Dart Pro1 225s bare head to get them cnc? And what kind of valves should I upgrade for nitrous, or would the 2.05/1.60 work good? They will be going on a 6.0 and replace the stock 317's
Thanks,
JJ
Thanks,
JJ
Thread Starter
Joined: Sep 2004
Posts: 558
Likes: 7
From: South Texas
I will do the valve job at least then, unless the guy you told me contacts me so I can send them over for the CNC.
The setup its a 02 6.0 lq9 with an ms3 cam, Victor Jr, Arons elbow with a 90mm NW TB, FLT 80E, Vig. 3600 stall, 4.10s rear. The kit its a nitrous outlet dual bottle, with a Zex perimeter plate, will be doing a 150 shot and later a 200 when I learn to read the plugs. Will get a custom cam later on as well.
The setup its a 02 6.0 lq9 with an ms3 cam, Victor Jr, Arons elbow with a 90mm NW TB, FLT 80E, Vig. 3600 stall, 4.10s rear. The kit its a nitrous outlet dual bottle, with a Zex perimeter plate, will be doing a 150 shot and later a 200 when I learn to read the plugs. Will get a custom cam later on as well.
Trending Topics
Ls1tech & Truck Sponsor
iTrader: (4)
Joined: Jun 2010
Posts: 2,267
Likes: 1
From: Wichita falls Texas
You will get a solid gain either way. 20-25rwhp box stock as a guess.
I would at the least make sure you have a conversation with him. Worth the time. No need to rush a motor build.
I would at the least make sure you have a conversation with him. Worth the time. No need to rush a motor build.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Thats not to bad.
I was not aware anyone would CNC someone elses head. I thought they just wanted to sale there castings that are CNC. I was aware you could get hand porting though.. Someone fill me in here. Graham who will CNC someone elses head?
Thanks
Dave
I was not aware anyone would CNC someone elses head. I thought they just wanted to sale there castings that are CNC. I was aware you could get hand porting though.. Someone fill me in here. Graham who will CNC someone elses head?
Thanks
Dave
The Dart's can flow very well with some hand porting or CNC, got a couple people that run them with great success.. One that is a 429 in it with Dart 205 (there small but its what he had) that tricky ricky i believe did and it makes killer power, and runs mean! Alot of people dont like them but they are great heads for the money! I use to have a pair and never finished that build and sold them and went bigger motor and got some PI LXR 11* 235's 
I have heard of atleast one company that has CNC'd them, but i cant remember the name
I have heard of atleast one company that has CNC'd them, but i cant remember the name
Thread Starter
Joined: Sep 2004
Posts: 558
Likes: 7
From: South Texas
I'll see what I can do with them. I just got my TQ restalled, just waiting for the transbrake its just getting an update, I'll start testing the truck to see what I can get out of it with the 317's then swap this heads and see what gains it gives me.
Thanks guys.
Thanks guys.
Ls1tech & Truck Sponsor
iTrader: (4)
Joined: Jun 2010
Posts: 2,267
Likes: 1
From: Wichita falls Texas
Keep in touch. Im looking forward to the results.
Thread Starter
Joined: Sep 2004
Posts: 558
Likes: 7
From: South Texas
Well the trans brake its on, hope I can get the trans in the truck today and start testing asap.
Here is an old video with the old setup, you can see the delay there.
http://www.youtube.com/watch?v=PDBE6NbELIo
Thread Starter
Joined: Sep 2004
Posts: 558
Likes: 7
From: South Texas