4U2NV-SS

iTrader: (21)

I did a search and seen the plate installed on the intake, however I want to see it in a car. I am trying to decide to go with the brackets N.O. sells or the brackets that mount on top of the intake. I was also thinking of mounting the solenoids to the driver side head, but it will be tight to run a short clean line from my battery mount fuel cell. Thanks guys! Pix's if you can...

Art

4U2NV-SS

iTrader: (21)

TTT.....Anyone out there???

Grant@NitroDaves

HERE is a link to our gallery of our Vehicle Specific 102mm Plate Kit installed.

SmokedOutZ28

iTrader: (35)

I like that! who's rails are those?

1nasty86

iTrader: (63)

i should have a REAL picture to show really soon.

TAGOES11S

iTrader: (13)

Grant where do you mount a purge with those brackets?

Nitro Dave's Nitrous Outlet

iTrader: (25)

Our solenoids have a purge port in the side. So the purge solenoid hard mounts to the side of our solenoid.
Dave

4U2NV-SS

iTrader: (21)

Thanks Grant, I like and seen those! Anyone running one with a dedicated fuel sell???

4U2NV-SS

iTrader: (21)

Please!!! I want to get my parts in order so when I get my taxes back I can place my order!!!

1nasty86

iTrader: (63)

placed a order with dave yesterday.

Jakhammer009

iTrader: (1)

After seeing this installed, I ordered my solenoid brackets, hardline kit, and 102mm plate! I already have been running NX setup, but this is much cleaner IMO!!! My 102mm FAST will be here Tues. And I hope to be installing this between it and my NW 102 throttle body! I will get pics up as soon as possible!! Thanks again!

1nasty86

iTrader: (63)

and here you go. plan to redo the feed line from the rail.

Detoxx03

iTrader: (14)

That looks real nice

SmokedOutZ28

iTrader: (35)

What do you have to do differently to the fuel feed line?

1nasty86

iTrader: (63)

I actually bent that feed line. I already had another 102 kit and bought the brackets to move them to the top of the intake. I plan on buying a 90* fitting to come out of the noid so the hard line is a straight shot. Kit looks wicked and the pics do not do it justice.

4U2NV-SS

iTrader: (21)

Thanks 1nasty86! Looks good!

Would I be able to swap the fuel and nitrous soleniods around? Since I am running a dedicated tank in the battery location.

Keep them coming!!!

1nasty86

iTrader: (63)

I dont see why not. I just always match red with fuel and black with nitrous.

Nitro Dave's Nitrous Outlet

iTrader: (25)

1 nasty 86..
Looking good.

Nitro Dave's Nitrous Outlet

iTrader: (25)

The solenoid brackets are solenoid specific. I would suggest running the dedicated hose around the back of the intake. Thats what we did on an install we did here. Looked super clean.
Dave

4U2NV-SS

iTrader: (21)

Thanks Dave that is a good idea! Any picture of that install by chance?