Nitrous and Mass Air Flow Meter question
Thread Starter
Teching In
Joined: Mar 2010
Posts: 7
Likes: 0
From: LaPorte Tx
Nitrous and Mass Air Flow Meter question I have a 03 ZO6 and replaced my cold air intake with a Callaway Honker.With this new set up it moved my mass air flow meter (i think thats what its called) up almost to my throtle body,with exeption of a four inch rubber boot.Question is, can I hook nitrous in front of the mass flow mete? its about 8 inches to the plastic part of the intake. not sure what my options are.Thanks for the imput.
Guest
Posts: n/a
You never spray a wet shot pre-maf. No debate in here at all. Only some dry systems will spray the MAF.
I do not mean to sound rude at all but maybe you should give us a basic layout of the system and the tuneup so we can look it over to make sure you have "all your ducks in a row" and dont hurt any parts.
It never hurts to double check and there are some very knowledgeable people here.
Graham @ N20
I do not mean to sound rude at all but maybe you should give us a basic layout of the system and the tuneup so we can look it over to make sure you have "all your ducks in a row" and dont hurt any parts.
It never hurts to double check and there are some very knowledgeable people here.
Graham @ N20
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo Thread Starter
Teching In
Joined: Mar 2010
Posts: 7
Likes: 0
From: LaPorte Tx
Thats why I didn't hook it back up..I just wanted a second on it..That Honker in take pushed that MAF almost to the throtle body. Might need a plate or something..
Cars never been tuned..Just put headers and the Air intake on it. Cams going in in a few weeks and their going to do my tune..GForce is whos gonna do my work.
Cars never been tuned..Just put headers and the Air intake on it. Cams going in in a few weeks and their going to do my tune..GForce is whos gonna do my work.
