To all Nitrous Works customers,

As many of you already know, Barry Grant and its subsidiary Nitrous Works recently closed its doors and filed for bankruptcy. Although Nitrous Works was a competitor, we at NX were saddened to hear of their demise.

Recently we have received several calls from Nitrous Works customers needing technical advice and parts. Nitrous Express built its business and reputation on excellent customer service and to this end we would like to offer former Nitrous Works customers free tech help, low cost replacement parts and repair services for their Nitrous Works products.

Effective immediately, NX will provide no charge technical help and will perform low cost service work for Nitrous Works products. Nitrous Works customers can simply call the normal NX tech line at 940-767-7694 for tech help, parts, or service.

Nitrous Works customers who would like service work performed should send their products, freight prepaid, to the address below:

Nitrous Express
ATTN: Service Department
5411 Seymour Hwy.
Wichita Falls, TX 76310

Please include a note that contains your name, address, phone number and a description of the service work desired.

 

Damn that sucks about Barry Grant and Nitrous Works. I've ran some of their stuff and installed some of their stuff on some friends cars over the years.

Racing is a luxury and he catered to racers but when the ecomomy tanks, people cut out luxuries and only fufill their needs and not their wants.

 

That's a pretty noble move there NX. Speaks volumes about your willingness to provide support wherever you can. Definitely noted.

~Austin

 

Thank you sir! Anything we can do to help. We appreciate your support!

 

I didn't know they closed their doors. This economy is effecting everyone.

 

Barry grant did himself in. Poor customer service will eventually get you no matter what your name is.

good move NX.

 

Does this look and sound familiar??

 

LMAO!!!!! Does look familiar!

 

Barry Grant went belly up for a reason!!! I had nothing but terrible dealings with there products as well as there customer Svc. $550 King Sumho pump paper weight after 200 miles and no recourse!!!!

It is good to see a vendor stepping up and helping out customers though. Thanks NX.

 

Hmm this seems awful familiar. Lol

 

Do y'all offer a true 2 stage plate kit like nitrous works? Got a friend who has a Nitrousworks' Magnum "X" Dual Stage System for sale. Says it is true 2 stage kit with both stages adjustable 100-550hp. He isn't cheap with the price is why I am asking. Looking for a true 2 stage plate.

 

http://www.nitrousexpress.com/nx642-...50-flange.html


We also make this in a 4500 dominator if needed. If needing an entire system we can get you covered there too.


-Chris

 

So this is a real 2 stage system? I can run either or both stages at one time?

 

Correct.....

You can launch on one stage and then cut it off and bring in the bigger jetted second stage or you can launch on the 1st stage and then bring in the 2nd stage for a combined power level.


-Chris

 

I'm a have to head over to your site and check it out. A lot easier than running two stage fogger (and cheaper too)

 

You can look into our hornet dual stage plate as well. Precision machine right here in texas, Stainless steel solenoids to prevent stripping and galling, coated steal cans to have the best magnetic energy to open the piston. It has hardlines for a much cleaner install. This plate has the best distribution out of any plates on the market. If you have any questions feel free to ask! - Matt



http://www.nitrousoutlet.com/carbure...100-700hp.html

 

bump for the best nitrous company on the planet ^

nitrous outlet FTW

 

This guy knows what's up!

 

FYI, dont turn off one stage and activate another. Too much going on with that. Let the engine eat.