TNT kit worth it?
TNT kit worth it? My buddy has a TNT kit with the 90mm power ring and all accessories that come with it. It also has a MSD window switch. I assume its the F1 kit but not positive. The kit only has 3 bottles through it. He will let me have it all for $300. Pretty good deal?
I would like to spray whatever it takes to run a 10 second pass and then put the 100 jets in it and be done with it. My car is a 99 ss M6 with pretty much every bolt on, Ms4 cam and Moser 9 inch with 4.11 gear.
Not sure. it went 7.9 at 94mph in the 1/8th with stock 10 bolt and 3.42 gear leaving at idle with a 2.0 60 foot. I imagine it will go 7.6 or so in 1/8th now or so. maybe faster. I would imagine high 11's or so in 1/4. maybe as low as a 11.8. I haven't ran it with the 9 inch yet.
I had a tnt power ring f1 kit on my SS.....by far my favorite kit ever. Hit hard and really all i can say is i loved it. I will be searching high and low to find one for the mustang when i have the money.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad GallardoGuest
Posts: n/a
So on a dual nozzle setup that is closer to a 175hp. I think I have seen different jetting for them. I talked with a customer very recently that has 52n jets in each nozzle for a rated 150hp shot.
Also I am not trying to knock the system. I have just seen guys hurt parts because of the jetting. The power ring is not too bad, especially for when it was made.
On a single nozzle, we have a 41/22 as a 75 shot.
So on a dual nozzle setup that is closer to a 175hp. I think I have seen different jetting for them. I talked with a customer very recently that has 52n jets in each nozzle for a rated 150hp shot.
Also I am not trying to knock the system. I have just seen guys hurt parts because of the jetting. The power ring is not too bad, especially for when it was made.
So on a dual nozzle setup that is closer to a 175hp. I think I have seen different jetting for them. I talked with a customer very recently that has 52n jets in each nozzle for a rated 150hp shot.
Also I am not trying to knock the system. I have just seen guys hurt parts because of the jetting. The power ring is not too bad, especially for when it was made.
i run the power ring and had it for years with no issues. the hp was very clost to rating with the tq being crazy. when i was running 12.2 n/a i went 10.8 on a 150 shot and a m6.
if the 150 is a 200 shot,what is the 100?
if the 150 is a 200 shot,what is the 100?