finally made a decent pass
Thread Starter
11 Second Club
iTrader: (16)
Joined: Feb 2006
Posts: 1,865
Likes: 0
From: Cape Girardeau, MO
finally got this kit working right after basically 2 years of beating my head on a wall. The car would go 7.0@99mph no matter what and wouldnt 60ft any harder then it would on motor.
Last night the car went 6.73@101mph with a 1.45 60ft. No bottle heater and 900psi. ended up being swollen teflon in the piston cuttin down the nitrous flow. I know there is prolly bit more in it with some tuning and suspenion changes. was more concerned to see if the dang thing would finally run a number or if i needed to set it on fire....
New best N/A pass too
Last night the car went 6.73@101mph with a 1.45 60ft. No bottle heater and 900psi. ended up being swollen teflon in the piston cuttin down the nitrous flow. I know there is prolly bit more in it with some tuning and suspenion changes. was more concerned to see if the dang thing would finally run a number or if i needed to set it on fire....

New best N/A pass too
Trending Topics
Thread Starter
11 Second Club
iTrader: (16)
Joined: Feb 2006
Posts: 1,865
Likes: 0
From: Cape Girardeau, MO
Car setup: 02 SS
Chris1313 ram air
MTI lid/k&n filter
Speed density tune so MAF delete
Stock TB
Stock ls6 intake
Stock 241 heads
Patg cam
Longtubes and dumped ORY
TH400 rmvb with a FTI converter
Moser 9"/4.11 gear
Full UMI rear suspension with comp 3 way drag shocks and strange singles up front
Hoosier 275 radials
HSW brute shot kit
Chris1313 ram air
MTI lid/k&n filter
Speed density tune so MAF delete
Stock TB
Stock ls6 intake
Stock 241 heads
Patg cam
Longtubes and dumped ORY
TH400 rmvb with a FTI converter
Moser 9"/4.11 gear
Full UMI rear suspension with comp 3 way drag shocks and strange singles up front
Hoosier 275 radials
HSW brute shot kit
Thread Starter
11 Second Club
iTrader: (16)
Joined: Feb 2006
Posts: 1,865
Likes: 0
From: Cape Girardeau, MO
Unfortunately not, this video is only decent angle of a launch
http://www.youtube.com/user/fsperfor...11/aqAqikC_Q3w
http://www.youtube.com/user/fsperfor...11/aqAqikC_Q3w
Pretty good passes. Im hoping to run some low 7s on motor after my th400 swap. Good luck with the adjustments. Its got more left in it, just have to get that short time down on the jug.


