personal best on nitrous but still not satified!!
#21
TECH Fanatic
iTrader: (35)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Personally I think your NA times were on the slow side probably due to that "TIGHT" converter, when the spray hit, it let the converter work very well.
I am betting your car is probably more in the 420-450 range on the engine, somewhere in that area.
You have a H/C car that is in the 10s on a 150 shot,, I dont see much wrong with that, considering you have the stock rear in it, I am guessing that you probably have the stock suspension in it also. Sounds like the car is working to me.
I am betting your car is probably more in the 420-450 range on the engine, somewhere in that area.
You have a H/C car that is in the 10s on a 150 shot,, I dont see much wrong with that, considering you have the stock rear in it, I am guessing that you probably have the stock suspension in it also. Sounds like the car is working to me.
#22
TECH Resident
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The timing being taken out full time would account for your car slowing down considerably N/A. If you could switch back and forth, the drop off from spray to motor would be less drastic.
#23
On The Tree
Thread Starter
iTrader: (2)
Join Date: Feb 2010
Location: ms
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
again thanks for all the input but as far suspension, i do have umi short ta and lca. the problem was that with that 60ft i was thinking that it would have had a better et bc iv seen guys with comparable setups with higher 60s have better et but at the same time i guys they are probally making more hp too! to say the least im still happy and my s60 rear should be in about 2 more weeks then i bump the shot up to 200 and see what happens.
#24
On The Tree
Thread Starter
iTrader: (2)
Join Date: Feb 2010
Location: ms
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
update i think i found out why my et's wasnt were i thought they should be, my fuel pump is dying i only have 40 psi at the rail at ideling. Thats after i change fuel filter and regulator so hopefully i can get back to the track and see what it does. Just wondering should i go back with a wallboro 255 or try a racetronix