Solenoid bracket help
Thread Starter
10 Second Club
iTrader: (38)
Joined: Mar 2003
Posts: 593
Likes: 0
From: Whiteland, Indiana
Solenoid bracket help I have looked and can not find what I am looking for, so I'm posting in hopes that maybe I just missed what I need.
I want brackets for both sides of the TB (to mount the fuel on one side and the nitrous on the other) but I want the solenoids to be mounted in the upright position and not on their side and I'd like to have the one on the drivers side to also hold the pruge solenoid, and for the brackets to be in black and must fit a FAST 102.
Thanks for any help!
I want brackets for both sides of the TB (to mount the fuel on one side and the nitrous on the other) but I want the solenoids to be mounted in the upright position and not on their side and I'd like to have the one on the drivers side to also hold the pruge solenoid, and for the brackets to be in black and must fit a FAST 102.
Thanks for any help!
did you look on Nitrous Outlets website??? I dont have an LSx so im not sure either I know the one for an lt1 mounts em horizontal on the fuel rail/ top of the intake Where the hells Whiteland In I grew up in New Castle
actually, theres probably nothing exactly like you want....
but Nitrous outlet can ,make you a custom bracket for a reasonable price..
you may have to take some pictures holding the solenoids where you want them to sit
but they can make anything you want.
but Nitrous outlet can ,make you a custom bracket for a reasonable price..
you may have to take some pictures holding the solenoids where you want them to sit
but they can make anything you want.
Thread Starter
10 Second Club
iTrader: (38)
Joined: Mar 2003
Posts: 593
Likes: 0
From: Whiteland, Indiana
Yes I looked. Whiteland is just south of Greenwood on 31.
Thread Starter
10 Second Club
iTrader: (38)
Joined: Mar 2003
Posts: 593
Likes: 0
From: Whiteland, Indiana
Something kinda like this but closer to the TB. I will be using hard lines as well with a Nitrous outlet TB plate system, and a FAST 102 as mentioned earlier.
Trending Topics
I dont have exactly what you are looking for but we can make it. Here is another option.
http://www.nitrousoutlet.com/gallery/photo.asp?id=374
Dave
http://www.nitrousoutlet.com/gallery/photo.asp?id=374
Dave
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Thread Starter
10 Second Club
iTrader: (38)
Joined: Mar 2003
Posts: 593
Likes: 0
From: Whiteland, Indiana
I appreciate the replies, but as I said in my original post I want the solenoids to be stood upright and not on their side like what is in the pics I provided.
I want fuel on one side of the TB and the nitrous/purge on the other side of the TB mounted on some nice brackets.
I want fuel on one side of the TB and the nitrous/purge on the other side of the TB mounted on some nice brackets.
