nitrous question
Thread Starter
On The Tree
iTrader: (4)
Joined: Feb 2008
Posts: 193
Likes: 0
From: Dirty South, Louisiana
nitrous question I have an lt1 396 all forged with eagle and srp piston. it has 11:1 compression, but i had the dart heads milled and used impala ss head gasket so i am thinking the compression is around 11:5 compression are a little higher. my question is how much spray would you safely put on the motor. Not trying to blow it up but dont want to leave nothing on the table.
Ls1tech & Truck Sponsor
iTrader: (4)
Joined: Jun 2010
Posts: 2,267
Likes: 1
From: Wichita falls Texas
I have an lt1 396 all forged with eagle and srp piston. it has 11:1 compression, but i had the dart heads milled and used impala ss head gasket so i am thinking the compression is around 11:5 compression are a little higher. my question is how much spray would you safely put on the motor. Not trying to blow it up but dont want to leave nothing on the table.
Trey
Does the block have splayed caps?
The crank and rods are eagle? H beam or I beam?
What is the ring gap? What rings?
Head bolts or head studs? ARP?
What ignition?
What does the fuel system consist of?
What does your nitrous system consist of?
Dave
The crank and rods are eagle? H beam or I beam?
What is the ring gap? What rings?
Head bolts or head studs? ARP?
What ignition?
What does the fuel system consist of?
What does your nitrous system consist of?
Dave
