TNT DRY SYSTEM PICS...
Re: TNT DRY SYSTEM PICS... DUDE, that looks so trick!!!
If you don't mind me asking, how much do you have invested in your system? That is a dry kit right? Who has the best prices?
Bill
If you don't mind me asking, how much do you have invested in your system? That is a dry kit right? Who has the best prices?
Bill
Thread Starter
On The Tree
iTrader: (2)
Joined: Nov 2001
Posts: 190
Likes: 0
From: Pompano Beach, FL
Re: TNT DRY SYSTEM PICS... You'll have close to $900+ invested with the Kit, Heater, MSD window switch and pills, and a new set of plugs - NGK's. Then you will have an install fee if you need a shop to put it in.
Teching In
Joined: Jan 2002
Posts: 4
Likes: 0
From: Miami, FL
Re: TNT DRY SYSTEM PICS... Hey, guys that is my car. Dave did a great job on the install and the car runs awesome with just a 75hp Shot now. I'll be swaping the nozels out to the 100HP shot soon. Thanks for all the compliments...
<img src="graemlins/burnout.gif" border="0" alt="[Burnout]" />
[ January 27, 2002: Message edited by: LS1KrakeN ]
[ January 28, 2002: Message edited by: LS1KrakeN ]
[ January 28, 2002: Message edited by: LS1KrakeN ]</p>
<img src="graemlins/burnout.gif" border="0" alt="[Burnout]" />
[ January 27, 2002: Message edited by: LS1KrakeN ]
[ January 28, 2002: Message edited by: LS1KrakeN ]
[ January 28, 2002: Message edited by: LS1KrakeN ]</p>
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Thread Starter
On The Tree
iTrader: (2)
Joined: Nov 2001
Posts: 190
Likes: 0
From: Pompano Beach, FL
Re: TNT DRY SYSTEM PICS... [quote]Originally posted by AzzHauler:
<strong>How are the lines fastened to the lid?</strong><hr></blockquote>
The nozzles have tapered threads.. You just drill a smaller hole in the lid and screw the nozzle in.
<strong>How are the lines fastened to the lid?</strong><hr></blockquote>
The nozzles have tapered threads.. You just drill a smaller hole in the lid and screw the nozzle in.
TECH Resident
iTrader: (3)
Joined: Nov 2001
Posts: 979
Likes: 0
From: Richmond, VA Where fast cars, well......are hard to come by.
Re: TNT DRY SYSTEM PICS... Well, that clears a lot up for me. <img src="gr_stretch.gif" border="0"> I got a lid with holes pre-made but they were bigger than the nozzle, so I have to fond another way...
Teching In
Joined: Jan 2002
Posts: 4
Likes: 0
From: Miami, FL
Re: TNT DRY SYSTEM PICS... Dave, to replace the 75HP Jets with the 100HP jets. Correct me if im wrong here, I have to hold down the bronze nut and unscrew the blue one right? Im assuming the noozles are there and I just replace the 75's with the 100? or am I confused? <img src="gr_eek2.gif" border="0"> thanks
<img src="graemlins/formula.gif" border="0" alt="[Pontiac]" />
<img src="graemlins/formula.gif" border="0" alt="[Pontiac]" />
Thread Starter
On The Tree
iTrader: (2)
Joined: Nov 2001
Posts: 190
Likes: 0
From: Pompano Beach, FL
Re: TNT DRY SYSTEM PICS... [quote]Originally posted by LS1KrakeN:
<strong>Dave, to replace the 75HP Jets with the 100HP jets. Correct me if im wrong here, I have to hold down the bronze nut and unscrew the blue one right? Im assuming the noozles are there and I just replace the 75's with the 100? or am I confused? <img src="gr_eek2.gif" border="0"> thanks
<img src="graemlins/formula.gif" border="0" alt="[Pontiac]" /> </strong><hr></blockquote>
You are correct.. Just make sure you do not rotate the nozzle while tightening or loosening (that’s why you need 2 wrenches). If you do, it will change the direction of the spray and it will not be as efficient.
<strong>Dave, to replace the 75HP Jets with the 100HP jets. Correct me if im wrong here, I have to hold down the bronze nut and unscrew the blue one right? Im assuming the noozles are there and I just replace the 75's with the 100? or am I confused? <img src="gr_eek2.gif" border="0"> thanks
<img src="graemlins/formula.gif" border="0" alt="[Pontiac]" /> </strong><hr></blockquote>
You are correct.. Just make sure you do not rotate the nozzle while tightening or loosening (that’s why you need 2 wrenches). If you do, it will change the direction of the spray and it will not be as efficient.
Launching!
Joined: Dec 2001
Posts: 263
Likes: 0
From: Jacksonville, FL
Re: TNT DRY SYSTEM PICS... Mark part of the nozzle on the outside of the lid on the side that it sprays to. Then, after you crank down the line, you'll know if its turned at all. These are 90º nozzles right?