89camaro

iTrader: (6)

how are u guys running the fuel setup on 2 stage kits for a carb setup? ill be running a stadalone and not sure how to do it. are u guys running a fuel pump for each stage?

built408

iTrader: (10)

Since your going carb just put a fuel log with 3 regulators. 1 motor, 1 for each stage.

89camaro

iTrader: (6)

could you run 1 bad *** pump to a y fitting and 2 regulaters for the nitrous and keep the motor on its own pump?

built408

iTrader: (10)

You could, but why?

87silverbullet

iTrader: (11)

This is the way I have done it already. Low 9's so far and no issues. One regulator for the motor on pump one regulator to both stages on a plate system.

89camaro

iTrader: (6)

chase are u saying that 1 pump will power everything? If so sounds kinda sketchy wouldent want it to lean out. and how would u be pulling fuel from the stand alone with the fuel log. im so confused lol

NXZ28

iTrader: (45)

I compare running one pump for two stages with running one stage off the fuel rail. I ran a NX direct port pilled to a 250hp shot off the fuel rail on my old 346. Never missed a beat. I am not saying to run your second stage off the fuel rail. I just think you would be fine running one pump for two stages off the stand alone. You will need separate fuel regulators and flow both stages to get the correct fuel pressure.

Firehawk441

iTrader: (41)

This is what he's referring to. A fuel log with 3 regulators. One regulator for the Carburetor and 2 for the Nitrous. One big pump from your tank feeds everything. No stand alone fuel system is necessary.

89camaro

iTrader: (6)

yeah i got it! thats a nice setup you got!

dferg99

iTrader: (2)

Very nice I was wondering how to do that.