Single NOS Fogger
06-18-2012, 04:55 PM
#1
Single NOS Fogger So i am putting together a small kit for my04 GTO.
Is it safe/acceptable to drill and tap the stock (corvette) LS1 intake behind (on top) of the TB where the EGR is on the fbody intakes?
If so what is the drill and tap size for an older fogger nozzle?
Thanks
Dom
Is it safe/acceptable to drill and tap the stock (corvette) LS1 intake behind (on top) of the TB where the EGR is on the fbody intakes?
If so what is the drill and tap size for an older fogger nozzle?
Thanks
Dom
06-19-2012, 09:52 AM
#2
FormerVendor
Join Date: Feb 2012
Location: Waco, TX
Posts: 634
Likes: 0
Received 0 Likes
on
0 Posts
I wouldn't recommend it because you can shot past your front cylinders. It would be better to tap the end of the throttle body or even better to just put it in the intake tube.
06-19-2012, 11:51 AM
#3
Why did you downgrade to an ls1 intake first of all? SEcond of all i asked this very question and the answer is NO! Needs to be ATLEAST 3/4 inches in front of your TB. Im running the Vararam on my 04, so that is NOT easy to do for me. So im going direct port.
