Turbo306Fox

iTrader: (3)

Im thinking about wiring my nitrous to the preset button on the steering wheel was wondering if anyone has done it and how hard it would be to do

armyboyatc

iTrader: (29)

I've never used the radio control button but I use my horn button and I LOVE it. ESP when racing in mexico.

Turbo306Fox

iTrader: (3)

Yea that was my initial plan but the radio button would be much better as you could hold the wheel with your hand and the button with your thumb where the horn takes your whole hand to use it

87silverbullet

iTrader: (11)

I did that a little over 3 years ago on my SS. I had 2 stages am/fm was one stage and preset button was another.

armyboyatc

iTrader: (29)

On my 1999 the horn button is on the side of the wheel where if I'm grabbing the wheel then I just hit it with my thumb.

Turbo306Fox

iTrader: (3)

How hard was it to get the buttons out and wired up

Sir Harmony

I was considering this as well last year, but never got around to it. I would imagine it shouldn't be difficult to wire.

87silverbullet

iTrader: (11)

It takes a little bit to get it done. You have to take the switch apart and get the diodes off the board and solder some wire in its place and then you will need to know what wires go thru the air bag coil to the radio to use to trigger the negative on the relay for the solenoids.

Its neat and knowbody knows its there.

Turbo306Fox

iTrader: (3)

Sounds pretty complicated lol

87silverbullet

iTrader: (11)

Not really. It just sound complicated.

warriorcustoms

iTrader: (10)

Just get a Nitrous Outlet ashtray switch panel & window switch NO need for a button to Activate Just hit the arm switch & itll spray at programed RPMs on 2 stages Thats what my cars gettin & one stage on a handheld button for racin in "Mexico" LMAO yall kill me with the mexico races & blow by a ****** taco bell or wendys Rof-Lmao Yeah thats 3 stages LoL 1 for an OH **** moment & 2 on a window switch for @ the track