Cold06

iTrader: (9)

I've searched but cant find anything even posted in the wiring sticky, I've got a micro wot, fpss, msd 8969 DIGITAL ws, and I'm unsure how to wire it all up. I see this but the 8969 has a grey wire...

Please help, I'm trying to get this installed while I still have a few days off of work.

jblankenship

iTrader: (5)

Are you using a zex box

Cold06

iTrader: (9)

No just my nx kit and purge. Ive got a paper on how to install that, but the msd 8969 box and fpss.

jblankenship

iTrader: (5)

So just two regular solenoids for a wet kit.

Cold06

iTrader: (9)

This is what I got, just need info on where to tie in the msd 8969 box.

Cold06

iTrader: (9)

jblankenship

iTrader: (5)

Where the fuel pressure safety switch goes to ground. Instead hook that tithe yellow wire on the msd8969. The window switch will send the ground signal through the fpss. I would also suggest an inline fuse where the black wire hooks to the positive side of the battery.

Cold06

iTrader: (9)

Ive got one for that, what about the gray?

jblankenship

iTrader: (5)

The gray on the msd will not be used in your setup.

Cold06

iTrader: (9)

Ok so where does everything else go.

jblankenship

iTrader: (5)

What do you mean? Just like the diagram you posted.