Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

Blown, stroked and sprayed...

Old Jul 4, 2002 | 12:49 AM
  #1  
tbyrne's Avatar
Thread Starter
TECH Senior Member
20 Year Member
iTrader: (15)
 
Joined: Dec 2001
Posts: 8,642
Likes: 0
From: Mass
Default Blown, stroked and sprayed...

<img src="http://www.tbyrne.com/projectls1_files/newprojectls12.jpg" alt=" - " />

Who says you can't have the best of all worlds <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />

1998 Z-28 with an ARE 409 stroker motor (8.9:1 compression), ATI F1 supercharger making 17# of boost and a carbon fiber Nitrous Express bottle sitting in the hatch ready to supply some more horsepower to this combo after the tuning is complete. The car made 602hp but the 50# injectors were maxed out after 5000 RPMs. The timing was also a conservative 10-11 degrees. A set of 72s are going in next week then it will be time to finish the programming. I'm expecting numbers to be close to 700 rear wheel... and then I'll spray it <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />

Tom

<small>[ July 04, 2002, 12:49 AM: Message edited by: tbyrne ]</small>
Reply
Old Jul 4, 2002 | 12:51 AM
  #2  
RTCamaroSS's Avatar
TECH Resident
 
Joined: May 2002
Posts: 829
Likes: 0
From: Fremont, CA
Default Re: Blown, stroked and sprayed...

Christ... I want it.. Gimme Gimme!
Reply
Old Jul 4, 2002 | 01:04 AM
  #3  
Unleashed's Avatar
Staging Lane
 
Joined: Apr 2002
Posts: 58
Likes: 0
From: Fayetteville, NC
Default Re: Blown, stroked and sprayed...

Ummm, can you actually hook that up? <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> Sounds badass....I want! <img border="0" title="" alt="[Razz]" src="gr_tounge.gif" />
Reply
Old Jul 5, 2002 | 09:16 AM
  #4  
tbyrne's Avatar
Thread Starter
TECH Senior Member
20 Year Member
iTrader: (15)
 
Joined: Dec 2001
Posts: 8,642
Likes: 0
From: Mass
Default Re: Blown, stroked and sprayed...

I have to be moving along pretty good before I can get to full throttle without blowing the tires away. The additional power comes in handy merging onto the highway <img border="0" alt="[Fluffy]" title="" src="graemlins/fluffy.gif" />

Tom
Reply
Old Jul 6, 2002 | 03:04 AM
  #5  
Ron@Vengeance's Avatar
FormerVendor
iTrader: (51)
 
Joined: Nov 2001
Posts: 5,628
Likes: 1
From: Cumming GA
Default Re: Blown, stroked and sprayed...

Tom, what seats ya got in there? They would take the place of my 6way TA sets I have now nicely. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
Reply
Old Jul 7, 2002 | 12:25 AM
  #6  
tbyrne's Avatar
Thread Starter
TECH Senior Member
20 Year Member
iTrader: (15)
 
Joined: Dec 2001
Posts: 8,642
Likes: 0
From: Mass
Default Re: Blown, stroked and sprayed...

They are the Momo Street Racer seats. Totally changed the way the car looks and are very comfortable to sit in.

Tom
Reply
Old Jul 28, 2002 | 10:12 PM
  #7  
tbyrne's Avatar
Thread Starter
TECH Senior Member
20 Year Member
iTrader: (15)
 
Joined: Dec 2001
Posts: 8,642
Likes: 0
From: Mass
Default Re: Blown, stroked and sprayed...

672hp so far. Almost there! <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />

Tom
Reply
Old Jul 29, 2002 | 07:02 AM
  #8  
AzzHauler's Avatar
TECH Resident
iTrader: (3)
 
Joined: Nov 2001
Posts: 979
Likes: 0
From: Richmond, VA Where fast cars, well......are hard to come by.
Default Re: Blown, stroked and sprayed...

Crikey!!

I'd love to have some FI, but us college younguns can't afford nice things like that. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
Reply
Old Aug 4, 2002 | 11:36 AM
  #9  
Mekkadon's Avatar
TECH Enthusiast
iTrader: (3)
 
Joined: May 2002
Posts: 642
Likes: 0
From: Nashville, TN
Default Re: Blown, stroked and sprayed...

good lord <img border="0" alt="[hail]" title="" src="graemlins/gr_hail.gif" />
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 08:14 PM.