I HAVE A 100 SHOT OF DRY CAR IS NEW FUEL PRESSURE IS GOOD, O2'S ARE GOING DOWN TO 795!! I ADDED 8 PERCENT MORE FUEL AND THEY ONLY CAME UP TO 850. ANY THOUGHTS.

 

Added fuel how? Edit or MAFT? General rule with a dry shot is, if your injector duty is in a safe range NA (60-75%)@ WOT and your A/F is dialed in around 13.0, you do not need to adjust the enrichment for nitrous. The pcm will do it for you! Sounds to me you have a fuel delivery problem....most likely you need to upgrade to SVO 30# injectors. Hope this helps.

<small>[ October 17, 2002, 02:22 PM: Message edited by: BLUEBYU ]</small>

 

Tuning of 02 sensors is BS.Get it on a dyno and see what the REAL a/f looks like via a WB...

JS

 

added fuel by using a translator. are the scanmaster o2 readings junk? thanks for the input!

 

Did you remove your MAF screen ?

 

screen is still in mass air.