150 shot results!!
Thread Starter
Staging Lane
Joined: Sep 2013
Posts: 56
Likes: 0
My car is very similar to urs. 3100 on the Trans brake may be a little to tight. MY old converter stalled to 3600 once the nitrous hit it went to I believe 4000. Never really paid attention. Best 60ft was a 1.33 then my converter broke. Yes that was on a 150 shot. Good luck man. U will love the th400.
Launching!
Joined: Sep 2011
Posts: 206
Likes: 0
Speed Inc si5 cam ls6 intake hooker headers junk nos plate mwc fab 9 th400 with a junk B&m 3600 stall converter I had laying around no ac heat or carpet. Strange double adjustable coil overs on all 4 corners 3.90 gear. Tuned by ams performance. Car went 9.92 @ 134 on the pass before the converter let go. Best 1/8th mile pass was a 6.19 @ 108. I have a new converter in it now. Should go alot faster. I have a post in the fastest stock cube nitrous list. 
Last edited by GIMPY02; Jun 12, 2014 at 02:55 PM.
Thread Starter
Staging Lane
Joined: Sep 2013
Posts: 56
Likes: 0
Speed Inc si5 cam ls6 intake hooker headers junk nos plate mwc fab 9 th400 with a junk B&m 3600 stall converter I had laying around no ac heat or carpet. Strange double adjustable coil overs on all 4 corners 3.90 gear. Tuned by ams performance. Car went 9.92 @ 134 on the pass before the converter let go. Best 1/8th mile pass was a 6.19 @ 108. I have a new converter in it now. Should go alot faster. I have a post in the fastest stock cube nitrous list.
Launching!
Joined: Sep 2011
Posts: 206
Likes: 0
That thing leaves nice! What rpm do you shift at? ever dyno? weight of car? if I'm a cam swap away from running close to that that will be next on the list lol. same rear and gear and stall speed as you. your making me anxious to finish this thing up and get to the track.
My stall is a 4200 now. That 3600 stall converter hated life and I was forced to replace it. If this car goes a 5.9 to the 1/8th on the 150 shot. I will bump it to 250 and start going for the sbe record. I'll be at byron in a week or two. Lmk if ur interested in going. I'll give u a hand with ur car
Last edited by GIMPY02; Jun 14, 2014 at 12:52 AM.
Thread Starter
Staging Lane
Joined: Sep 2013
Posts: 56
Likes: 0
!!!UPDATE!!!
Well finally got to the track, things did not go as planned but I'm still happy with it. First pass out went 11.098 at 120 with a 1.50 60'. On this pass the nitrous was shutting off at high rpm's so i had to adjust my window switch. Next pass was a little better i then changed my shift light to 6k instead of 6300. it still seamed like it was turning off before i shifted. so the next pass with the light set at 6k it went 11.056 i think it was at 121 with a 1.49. so at this point i already had i think it was about 4 passes. On my 5th pass it went 6.9, 11.029 at 122 with a 1.471 60' this was the best pass of the day i was happy that i got into the 6's but i think my bottle was finally getting tired on the big end. I went back out and each pass it got a little slower and my mph was dropping off by 2-3mph each run, bottle was getting empty =(.
Now that i got everything set up correct Im gonna go back out in a few weeks with a full bottle and hopefully go 10.99 thats the goal with this bolt-on 510/510 lift cam 806 headed car lol. I'm really thinking about swapping the cam out but idk what i want to do next? maybe up it to a 200 shot. Kinda bummed out but its a consistent 11.0 car haha. I did make a pass on motor and it went 12.8 at i think 109 for anyone that was curious. The converter is also set up for a 200 shot kinda wish i went with a 4000 nitrous converter but it is what it is.
Well finally got to the track, things did not go as planned but I'm still happy with it. First pass out went 11.098 at 120 with a 1.50 60'. On this pass the nitrous was shutting off at high rpm's so i had to adjust my window switch. Next pass was a little better i then changed my shift light to 6k instead of 6300. it still seamed like it was turning off before i shifted. so the next pass with the light set at 6k it went 11.056 i think it was at 121 with a 1.49. so at this point i already had i think it was about 4 passes. On my 5th pass it went 6.9, 11.029 at 122 with a 1.471 60' this was the best pass of the day i was happy that i got into the 6's but i think my bottle was finally getting tired on the big end. I went back out and each pass it got a little slower and my mph was dropping off by 2-3mph each run, bottle was getting empty =(.
Now that i got everything set up correct Im gonna go back out in a few weeks with a full bottle and hopefully go 10.99 thats the goal with this bolt-on 510/510 lift cam 806 headed car lol. I'm really thinking about swapping the cam out but idk what i want to do next? maybe up it to a 200 shot. Kinda bummed out but its a consistent 11.0 car haha. I did make a pass on motor and it went 12.8 at i think 109 for anyone that was curious. The converter is also set up for a 200 shot kinda wish i went with a 4000 nitrous converter but it is what it is.
Last edited by LsxBird; Jul 7, 2014 at 07:54 PM.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Launching!
Joined: Sep 2011
Posts: 206
Likes: 0
!!!UPDATE!!!
Well finally got to the track, things did not go as planned but I'm still happy with it. First pass out went 11.098 at 120 with a 1.50 60'. On this pass the nitrous was shutting off at high rpm's so i had to adjust my window switch. Next pass was a little better i then changed my shift light to 6k instead of 6300. it still seamed like it was turning off before i shifted. so the next pass with the light set at 6k it went 11.056 i think it was at 121 with a 1.49. so at this point i already had i think it was about 4 passes. On my 5th pass it went 6.9, 11.029 at 122 with a 1.471 60' this was the best pass of the day i was happy that i got into the 6's but i think my bottle was finally getting tired on the big end. I went back out and each pass it got a little slower and my mph was dropping off by 2-3mph each run, bottle was getting empty =(.
Now that i got everything set up correct Im gonna go back out in a few weeks with a full bottle and hopefully go 10.99 thats the goal with this bolt-on 510/510 lift cam 806 headed car lol. I'm really thinking about swapping the cam out but idk what i want to do next? maybe up it to a 200 shot. Kinda bummed out but its a consistent 11.0 car haha. I did make a pass on motor and it went 12.8 at i think 109 for anyone that was curious. The converter is also set up for a 200 shot kinda wish i went with a 4000 nitrous converter but it is what it is.
Well finally got to the track, things did not go as planned but I'm still happy with it. First pass out went 11.098 at 120 with a 1.50 60'. On this pass the nitrous was shutting off at high rpm's so i had to adjust my window switch. Next pass was a little better i then changed my shift light to 6k instead of 6300. it still seamed like it was turning off before i shifted. so the next pass with the light set at 6k it went 11.056 i think it was at 121 with a 1.49. so at this point i already had i think it was about 4 passes. On my 5th pass it went 6.9, 11.029 at 122 with a 1.471 60' this was the best pass of the day i was happy that i got into the 6's but i think my bottle was finally getting tired on the big end. I went back out and each pass it got a little slower and my mph was dropping off by 2-3mph each run, bottle was getting empty =(.
Now that i got everything set up correct Im gonna go back out in a few weeks with a full bottle and hopefully go 10.99 thats the goal with this bolt-on 510/510 lift cam 806 headed car lol. I'm really thinking about swapping the cam out but idk what i want to do next? maybe up it to a 200 shot. Kinda bummed out but its a consistent 11.0 car haha. I did make a pass on motor and it went 12.8 at i think 109 for anyone that was curious. The converter is also set up for a 200 shot kinda wish i went with a 4000 nitrous converter but it is what it is.
Thread Starter
Staging Lane
Joined: Sep 2013
Posts: 56
Likes: 0
To be honest i didn't really pay close attention to the wide band. Its somewhere between 11.5-12.2 i think. I know i should have paid more attention to it but it didn't cross my mind. I did pull a plug too see what it looked like it looked ok i guess, there was drive time on them. Not exactly sure how to read the plugs. when i go back I'm bringing a few sets of plugs anyways. I need to find someone to help me out with reading them and the tune up most likely. I also have timing pulled threw hp tuners so thats another problem there i don't have the software it's on the list of things to buy.
You can always email me plug pictures and I can help. We also have the ability to live chat(M-F 8:30-5:30) via Facebook if you go on and shoot a friend request to this account: https://www.facebook.com/profile.php?id=100008181760187
Thread Starter
Staging Lane
Joined: Sep 2013
Posts: 56
Likes: 0
You can always email me plug pictures and I can help. We also have the ability to live chat(M-F 8:30-5:30) via Facebook if you go on and shoot a friend request to this account: https://www.facebook.com/profile.php?id=100008181760187
Launching!
Joined: Sep 2011
Posts: 206
Likes: 0
To be honest i didn't really pay close attention to the wide band. Its somewhere between 11.5-12.2 i think. I know i should have paid more attention to it but it didn't cross my mind. I did pull a plug too see what it looked like it looked ok i guess, there was drive time on them. Not exactly sure how to read the plugs. when i go back I'm bringing a few sets of plugs anyways. I need to find someone to help me out with reading them and the tune up most likely. I also have timing pulled threw hp tuners so thats another problem there i don't have the software it's on the list of things to buy.
Thread Starter
Staging Lane
Joined: Sep 2013
Posts: 56
Likes: 0
That would be cool, appreciate it. I will let you know for sure next time i go.
Thread Starter
Staging Lane
Joined: Sep 2013
Posts: 56
Likes: 0
!!!Update!!! Went to the track again Finally made it in the 10's!!!! went 10.91 with a crappy 60' 1.50 spinning and nitrous turned of for a split second at the top of second, off the trailer. Next pass car hooked best 60' ever 1.44 nitrous was being funny again turning on and off it felt like. Went 11.02 at 116. If i can figure out why it is turning off or loosing power and make a clean pass i think it might have a 10.7x in it! Not to shabby for bolt-ons and a 510 lift cam!
Thread Starter
Staging Lane
Joined: Sep 2013
Posts: 56
Likes: 0
No fpss, Im guessing it might be a flow problem. When i put the bigger jets for 200 shot it was real bad, I then went back to the 62n 33f and it only did it a little. i wasn't able to catch a glimpse of the wide band while its happening. I checked my nitrous filter to see if it was clogged and it was pretty clean on the inside. my next guess might be the solenoid going bad? Not sure wanna do some more testing. My msd digital window switch turns the nitrous off at 6400 i shift at 6000. so I'm thinking wot switch or maybe the solenoid. But before that i want to confirm the air fuel ratio. Any other ideas?