New Stock Bottom End Record!
#22
Get's down for sure, I am a bit skeptical about the 1.15 60' and the "1.20" on the back tires however..
The first car in this video is a 1.21 60' at arguably one of the best tracks in the country, with more motor, in a "lighter" car...
The first car in this video is a 1.21 60' at arguably one of the best tracks in the country, with more motor, in a "lighter" car...
#27
I'm not trying to hate on him or anything, bc the lord knows everyone was hating on us when we were doing big things with the stock cube motor... It just seems a bit un-realistic.. I've helped on some big HP 275 cars that 60' that well, and make about 900+ more HP..
Did it come close to backing that # up that night?
Did it come close to backing that # up that night?
#29
TECH Veteran
iTrader: (11)
I'm not trying to hate on him or anything, bc the lord knows everyone was hating on us when we were doing big things with the stock cube motor... It just seems a bit un-realistic.. I've helped on some big HP 275 cars that 60' that well, and make about 900+ more HP..
Did it come close to backing that # up that night?
Did it come close to backing that # up that night?
Lets put it like this, I see what motors and what kind of cars it takes to go 1.15-1.21 60ft and this car looks like none of them.
If it cut a 1.28 then thats more believeable but 1.15 is kinda hard to swallow.
#30
11 Second Club
iTrader: (33)
Join Date: Aug 2004
Location: Gloucester, VA
Posts: 819
Likes: 0
Received 0 Likes
on
0 Posts
^^^^I second this. It takes a good bit of power or alot of weight reduction to cut 1.15's.
Lets put it like this, I see what motors and what kind of cars it takes to go 1.15-1.21 60ft and this car looks like none of them.
If it cut a 1.28 then thats more believeable but 1.15 is kinda hard to swallow.
Lets put it like this, I see what motors and what kind of cars it takes to go 1.15-1.21 60ft and this car looks like none of them.
If it cut a 1.28 then thats more believeable but 1.15 is kinda hard to swallow.
#32
9 Second Club
iTrader: (5)
I have seen his car go down the track a few times and it leaves pretty hard.
The 1.15 might be questionable because of the track it was ran on (75/80, I have seen some questionable 60' times come from there)
The 1.20 he ran at MIR I would bet is legit.
He has a th400 and the new Mickey, using all of his power off the starting line.
All these high HP 275 cars you guys are talking about (ours included) have 2 speed trans and dont use anywhere near there max power before the 60' marker.
Give him double the HP and I bet he slows down in the 60'.
The more power you have the harder it is to control... esspecially with a 248 first gear.
The 1.15 might be questionable because of the track it was ran on (75/80, I have seen some questionable 60' times come from there)
The 1.20 he ran at MIR I would bet is legit.
He has a th400 and the new Mickey, using all of his power off the starting line.
All these high HP 275 cars you guys are talking about (ours included) have 2 speed trans and dont use anywhere near there max power before the 60' marker.
Give him double the HP and I bet he slows down in the 60'.
The more power you have the harder it is to control... esspecially with a 248 first gear.
#38
FormerVendor
iTrader: (3)
Wayne,
The R/T versus 60' will still show the tale if it was tripped by something else other than the front tire.
That is if the video shown on page 1 correlates with the pass he ran said E.T. on. You can pretty much stop watch how long it takes him to leave off green or if he left off yellow on the time slip versus what the stop watch shows.
The R/T versus 60' will still show the tale if it was tripped by something else other than the front tire.
That is if the video shown on page 1 correlates with the pass he ran said E.T. on. You can pretty much stop watch how long it takes him to leave off green or if he left off yellow on the time slip versus what the stop watch shows.
#39
9 Second Club
iTrader: (5)
Wayne,
The R/T versus 60' will still show the tale if it was tripped by something else other than the front tire.
That is if the video shown on page 1 correlates with the pass he ran said E.T. on. You can pretty much stop watch how long it takes him to leave off green or if he left off yellow on the time slip versus what the stop watch shows.
The R/T versus 60' will still show the tale if it was tripped by something else other than the front tire.
That is if the video shown on page 1 correlates with the pass he ran said E.T. on. You can pretty much stop watch how long it takes him to leave off green or if he left off yellow on the time slip versus what the stop watch shows.
I got ya, that would work.
I have stood next to it when its ran before.
1.20 60'... I wouldnt question that.
I was just trying to say that I dont think you need 1500hp to 60' that good.
#40
Awesome results with such little mods. Car is rolling out for sure! Let us know when your ready for a cylinder head swap.