Where To Put The Nozzle?

Reply Subscribe

Thread Tools

Search this Thread

Feb 2, 2003 | 05:40 PM

J G

Thread Starter

Teching In

Joined: Jan 2003

Posts: 12

Likes: 0

From: Oklahoma city

Where To Put The Nozzle?

I'm installing my NX wet kit right now an an 02 z28... Where is the best place to put the nozzle? Does it need to be in a certain place or what? where are ou guys putting them?

Thanks

Feb 2, 2003 | 11:44 PM

CAT3

Restricted User

iTrader: (9)

Joined: Sep 2002

Posts: 7,603

Likes: 0

From: Sierra Vista, AZ

Re: Where To Put The Nozzle?

Dril it in about a 1/2 to 3/4 inch in front of the TB, making sure the spray hole is pointed towards the TB. doesnt matter if you go in from the side or top/bottom. get it as far centered inside the bellow as possible and make sure no air can seep in around the nozzle nut and nozzle assembly. Good-luck.

Charlie.

Feb 3, 2003 | 12:12 AM

ZEIK 383

Teching In

Joined: Aug 2002

Posts: 25

Likes: 0

From: GLASGOW, KY. 42141

Re: Where To Put The Nozzle?

<blockquote>quote:<hr />Originally posted by J G:
 I'm installing my NX wet kit right now an an 02 z28... Where is the best place to put the nozzle? Does it need to be in a certain place or what? where are ou guys putting them?

Thanks <hr /></blockquote>You can drill a hole in the lip of your MAF sensor[just large enough for the nozzle to pass through]and then the bellows, and then notch a half circle in the clamp. Make sure you're between the TB and the MAF. This allows for a very rigid installation of the nozzle. I've been doing it on the passenger side at 9 o'clock........has worked well for me! <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last