NX MAF install PICS ...
Thread Starter
!Dial-up Director
Joined: Nov 2001
Posts: 3,100
Likes: 1
From: Louisiana
NX MAF install PICS ... Almost finished up installing the NX MAF kit on my car. Pretty simple install so far, all I am waiting on now is a window switch and nitrous filter then I will be done. I have my bottle in the trunk and switchplate hidden inside the console. I ran the bottle line under the carpet and through the hole near the PCM. I will eventually relocate the noids like Ryan K has them and use hardlines to the MAF. Can't wait to test it out.
http://bellsouthpwp.net/j/s/jsears8/NXMAF/
Justin
http://bellsouthpwp.net/j/s/jsears8/NXMAF/
Justin
Re: NX MAF install PICS ... Jsears-
What kind of line did you use for your purge? I have the same setup as you and I like how the black line blends in. Also how much was the line and where did you get it? Thanks
Later,
Bryce <img border="0" title="" alt="[Cool]" src="gr_images/icons/cool.gif" />
What kind of line did you use for your purge? I have the same setup as you and I like how the black line blends in. Also how much was the line and where did you get it? Thanks
Later,
Bryce <img border="0" title="" alt="[Cool]" src="gr_images/icons/cool.gif" />
I can shift faster than you.
iTrader: (21)
Joined: Nov 2001
Posts: 5,133
Likes: 0
From: Baton Rouge, LA
Re: NX MAF install PICS ... Looks real good Justin! Come down to BR one evening for some dyno time. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
Thread Starter
!Dial-up Director
Joined: Nov 2001
Posts: 3,100
Likes: 1
From: Louisiana
Re: NX MAF install PICS ... Thanks Darren, I am going to get a NX window switch just to keep it all the same brand.
stang killer, going to start with a 100shot. Thats about as much as feel safe running with a stock bottom end and a 340 pump.
NHRA, it is just small vacum line that was supplied by the seller of the kit. You have to use a differnt fitting on the 'out' of the purge to connect it, and I slid the hard line over the end through the cowl.
Jason, thanks and I will once it's all ready. <img border="0" alt="[bomb]" title="" src="graemlins/gr_bomb.gif" />
Justin
<small>[ February 10, 2003, 05:46 AM: Message edited by: Jsears8 ]</small>
stang killer, going to start with a 100shot. Thats about as much as feel safe running with a stock bottom end and a 340 pump.
NHRA, it is just small vacum line that was supplied by the seller of the kit. You have to use a differnt fitting on the 'out' of the purge to connect it, and I slid the hard line over the end through the cowl.
Jason, thanks and I will once it's all ready. <img border="0" alt="[bomb]" title="" src="graemlins/gr_bomb.gif" />
Justin
<small>[ February 10, 2003, 05:46 AM: Message edited by: Jsears8 ]</small>
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Thread Starter
!Dial-up Director
Joined: Nov 2001
Posts: 3,100
Likes: 1
From: Louisiana
Re: NX MAF install PICS ... Thanks guys, I made a bottle mount for the spare tire area and added that, but I still need to trim and paint it. Also need to install the bottle heater, remote opener, and blow down tube. Half the fun is installing it all. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
Justin
Justin
Thread Starter
!Dial-up Director
Joined: Nov 2001
Posts: 3,100
Likes: 1
From: Louisiana
Re: NX MAF install PICS ... <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" /> I bet your pistons will last longer then mine though. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
Justin
Justin
